Mobile Audio

• 500 Watt High Efficiency Class D Design
• 2-OHM Stable Mono Block Amplifier
• MOSFET Power Supply
• High Level (Speaker)/Low Level (RCA) Input
• Remote Soft Delay Turn On/Off Circuit 
• Variable Low Pass Electronic Crossover
• Selectable 12dB Bass Boost EQ
• Variable Gain Control
• Remote Level Control Port (for optional PB-GAIN1 controller)
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.

• Fits 3XL Series Subwoofers
• 15" Black Steel Mesh Grill
• Corrosion Resistant Black Finish
• Mounts with no additional hardware needed
• One Piece Uni-Body Design

• Fits 2XL & 3XL Series Subwoofers
• 12" Black Steel Mesh Grill
• Corrosion Resistant Black Finish
• Mounts with no additional hardware needed
• One Piece Uni-Body Design

• Fits 2XL-1040D
• 10" Black Steel Mesh Grill
• Corrosion Resistant Black Finish
• Mounts with no additional hardware needed
• One Piece Uni-Body Design

• IPX67 Water Resistant Sealed Design
• Aluminum Die-Cast end caps with integrated input / output connectors
• 1200 Watt High Efficiency Full-Range Class D Design
• 2-OHM Stable Stereo Amplifier
• International Rectifier® Chip Set
• Ultra Low Current Draw
• 4-Layer Copper Plated PCB
• Conformal Coated PC Board
• PWM MOSFET Power Supply
• Digital Sound Optimization Circuitry
• High Damping Control Circuit
• High Current Voltage Ripple Rejection Circuitry
• 3.5mm AUX Input
• 3.5mm AUX Output
• Remote Soft Delay Turn On/Off Circuit 
• Variable Low/High Pass Electronic Crossover
• Variable 18dB Bass Boost EQ
• Variable Gain Control
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
• Remote Gain Control Included

• IPX67 Water Resistant Sealed Design
• Aluminum Die-Cast end caps with integrated input / output connectors
• 2000 Watt High Efficiency Full-Range Class D Design
• 2-OHM Stable Stereo Amplifier
• International Rectifier® Chip Set
• Ultra Low Current Draw
• 4-Layer Copper Plated PCB
• Conformal Coated PC Board
• PWM MOSFET Power Supply
• Digital Sound Optimization Circuitry
• High Damping Control Circuit
• High Current Voltage Ripple Rejection Circuitry
• 3.5mm AUX Input
• 3.5mm AUX Output
• Remote Soft Delay Turn On/Off Circuit 
• Variable Low/High Pass Electronic Crossover
• Variable 18dB Bass Boost EQ
• Variable Gain Control
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.

• Single 10" 200 Watt RMS Amplified Under Seat Subwoofer Enclosure
• Extruded Aluminum  Enclosure with Dynamic Damping
• 10” Injection Molded PP Cone Woofer
• 1.5" KSV Voice Coil Former
• 1-Channel 200 Watt High Efficiency Class D Design
• High Level (Speaker)/Low Level (RCA) Input
• Soft Delay Turn On/Off Circuit
• Auto Turn-on (high level input only)
• Variable Low Pass Electronic Crossover
• Variable 12dB Bass Boost EQ @ 45 Hz
• Variable Gain Control
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
• Variable Wired Remote Gain Control Included
• Mounting Hardware Included
• 10.9"W x 3.2"H x 14.4"D

• 6 x 9" Upgraded OEM Replacement Component System
• 80 Watts RMS/160 Watts Max
• Injection Molded PP Cone
• 20 oz. Magnet
• Nylon OEM Speaker Adapter
• 1” Inverted Titanium Dome Tweeter
• Inline Crossovers 
• Factory Plug and Play Wiring Adapters
• 4-ohm System Impedance

APPLICATIONS 
Some vehicles are equipped with OEM component system please use the OE65C-FD for these applications


• FORD Front Locations

2015-UP F-150 
2018-UP F-250 
2018-UP F-350 
2018-UP EXPEDITION 
2011-UP EXPLORER 
 


• LINCOLN Front Locations

2018-UP NAVIGATOR  


Speakers may fit in other make / model applications other than those listed above, be sure to have a certified installer verify which size you have in your vehicle before purchase. Not applicable with most premium audio systems

• 60 Watts RMS/120 Watts Max
• Injection Molded PP Cone
• 10 oz. Magnet
• Nylon OEM Speaker Adapter
• 1” Inverted Titanium Dome Tweeter
• Inline Crossovers 
• Factory Plug and Play Wiring Adapters 
• 4-ohm System Impedance

APPLICATIONS 
Some vehicles are equipped with OEM component system please use the OE65C-FD for these applications


• FORD
2019 Ranger Front Location
2015-UP F-150 Rear Location
2018-UP F-250 Rear Location
2018-UP F-350 Rear Location
2018-UP EXPEDITION Rear Location
2011-UP EXPLORER Rear Location
2011-UP EDGE 
2012-UP FOCUS 
2013-UP FUSION 
2010-UP MUSTANG 
2011-UP FIESTA 
2011-UP FLEX 
2015-UP TRANSIT CONNECT
2013-UP ESCAPE 
2013-UP C-MAX 


• LINCOLN

2016-UP MKX  
2018-UP NAVIGATOR  Rear Location


Speakers may fit in other make / model applications other than those listed above, be sure to have a certified installer verify which size you have in your vehicle before purchase. Not applicable with most premium audio systems

• 6 x 9" Upgraded OEM Replacement Co-Axial Speakers
• 80 Watts RMS/160 Watts Max
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 1” Silk Dome Tweeter
• 20 oz. Magnet
• Factory Plug and Play Wiring Adapters 
• 4-ohm System Impedance

APPLICATIONS 
Some vehicles are equipped with OEM component system please use the OE65C-FD for these applications


• FORD Front Locations

2015-UP F-150 
2018-UP F-250 
2018-UP F-350 
2018-UP EXPEDITION 
2011-UP EXPLORER 
 


• LINCOLN Front Locations

2018-UP NAVIGATOR  


Speakers may fit in other make / model applications other than those listed above, be sure to have a certified installer verify which size you have in your vehicle before purchase. Not applicable with most premium audio systems

APPLICATIONS 
Some vehicles are equipped with OEM component system please use the OE65C-FD for these applications


• FORD

2019 Ranger Front & Rear Locations
2015-UP F-150 Rear Location
2018-UP F-250 Rear Location
2018-UP F-350 Rear Location
2018-UP EXPEDITION Rear Location
2011-UP EXPLORER Rear Location
2011-UP EDGE 
2012-UP FOCUS 
2013-UP FUSION 
2010-UP MUSTANG 
2011-UP FIESTA 
2011-UP FLEX 
2015-UP TRANSIT CONNECT
2013-UP ESCAPE 
2013-UP C-MAX 


• LINCOLN

2016-UP MKX  
2018-UP NAVIGATOR  Rear Location


Speakers may fit in other make / model applications other than those listed above, be sure to have a certified installer verify which size you have in your vehicle before purchase. Not applicable with most premium audio systems

• 230’ 8 Gauge Power Wire
• 336 Strands
• 50% OFC/50% CCA Blended Wire
• Flexible Brown Satin PVC Insulation Jacket

• New PBX logo dust cap
• 12" Shallow Mount Subwoofer Dual 4-Ohm Subwoofer
• 400 Watts RMS/800 Watts Max
• Proprietary Single Piece Injection Molded Flat Cone Design
• Proprietary Composite Poly/Glass Fiber Basket
• 2" Vented KSV Voice Coil Former
• Chrome Push Terminals 
• 3.8" Mounting Depth
• 400 Watts RMS/800 Watts Max

• New PBX logo dust cap
• 10" Shallow Mount Dual 4-Ohm Subwoofer
• 350 Watts RMS/700 Watts Max
• Proprietary Single Piece Injection Molded Flat Cone Design
• High Roll Santoprene® Surround
• 2.0" Vented KSV Voice Coil Former
• Perimeter Aero-Vent Voice Coil Cooling Vents
• Proprietary Non Resonance Polycarbonate/Glass Fiber Basket
• Chrome Push Terminals 
• Optimally Designed for Small Sealed Enclosures 

• 100’ 4 Gauge Ground Wire
• 882 Strands
• 50% OFC/50% CCA Blended Wire
• Flexible Brown Satin PVC Insulation Jacket

IN STOCK NOW!

• 6.5" 3-Way Component Speaker System
• Hybrid 4 Layer Paper/Wool Blend Woofer Cone 
• Butyl Rubber Surround 
• Billet Aluminum CNC Cut Phase Plug
• 14 oz. Y-35 Woofer Magnet
• EFF Motor Structures (Efficient Flux Field) 
• Rigid Tooled Basket with Flat Black Finish
• 2.75" Soft Dome Mid-range Drivers
• Proprietary DDC Impregnated Mid-Range Membrane 
• 1"  Pivoting Silk Dome Tweeter w/Neodymium Magnet 
• Computer Aided External 12dB 3-way Crossover Network  
• 3-ohm System Impedance 
• Conventional or Bi-Amplified Input 

IN STOCK NOW!

• 100A Output Circuit
• 400A Output Circuit linked to up to 4 units 
• 220V Input Voltage
• Built in Cooling Fans
• LCD Voltage Meter Included 
• Intelligent 3-Way Protection Circuit