PB-1000D 1ch Compact Amplifier
- 1,000 Watt High Efficiency Class D Design
- 1-OHM Stable Mono Block Amplifier
- MOSFET Power Supply
- High Level (Speaker)/Low Level (RCA) Input
- Remote Soft Delay Turn On/Off Circuit
- Variable Low Pass Electronic Crossover
- Selectable 12dB Bass Boost EQ
- Variable Gain Control
- Remote Level Control Port (for optional PB-GAIN1 controller)
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
Home > Products > Amplifiers >
PB-1000D 1ch Compact Amplifier
Read more
PB-1000D 1,000W RMS @ 1Ω MONOBLOCK CLASS D COMPACT AMPLIFIER
PowerBass is pleased to introduce our newest series of amplifiers, the all new PB Series!
Borrowing from our former ACS series, these new amplifiers offer upgraded features, terminals and a dual layer PCB all packed in the most compact chassis allowable. To accomplish this we selected SMD parts and engineered a brand new high density heat sink engineered for maximum efficiency and cooling.
The result, an all new line-up of two, four, five and mono channel models that offer amazing performance and fantastic value. Ultra efficient, the PB Series amplifiers produce plenty of low distortion high fidelity audio in a footprint small enough to fit nicely in nearly any vehicle. The PB Series Amplifiers provide the perfect mix of performance and style in a sleek new compact chassis.
Specifications
- Peak Power: 2000 watts
- Power Supply: Unregulated PWM
- Inputs: RCA, 1 Pair Input, 1 Pair Speaker Level Input
- Dimensions (in Inches): 12.0" x 7.1" x 2.0"
- Depth: 12.0"
- Channels (mono): 1
- Variable Subsonic Freq: Variable 15 Hz - 50 Hz
- Equalization Boost/Cut: Switchable 0/12 dB @ 45Hz
- Height: 2.0"
- Width: 7.1"
- Switchable Subwoofer EQ: 0 / +12 dB @ 45 Hz
- Subwoofer EQ Frequency: 45 Hz
- Variable Subwoofer EQ: Switchable 0/+12 dB
- Low-Pass Crossover Freq: Variable 30 Hz - 250 Hz
- High-Pass Crossover Freq: N/A
- Crossover Slope: 12 dB
- Input Sensitivity: 0.25 V - 6.0 V
- S/N Ratio: >90 dB
- Total Harmonic Distortion: 0.5% @ 1,000 watts
- Strapped Output Power @ 2ohms: N/A
- Output Power (14.4 V) @ 4 ohm: 400 watts x 1
- Output Power (14.4 V) @ 2 ohm: 600 watts x 1
- Output Power (14.4 V) @ 1 ohm: 1000 watts x 1
- Frequency Response: 10 Hz - 250 Hz
Downloads
PB-1000D 1ch Compact Amplifier
Other Views
Recommended Products
- Waterproof design IPX7
- Bluetooth 5.0 Chip provides 30Ft. of wireless range
- Dual 1500mAh Rechargeable Battery’s provide 10 hours of music playback
- TWS True Wireless Stereo
- SPLIT the BT-200 into 2 speakers for Modular Stereo Sound
- Dual Passive Radiators for enhanced Bass Response
- Rubber Bumper Cover for Rugged Protection.
- Dual USB-A to USB-C Charge Cable included
- Waterproof design IPX7
- Bluetooth 5.3 Chip provides 30Ft. of wireless range
- RGB Lighting with User Selectable Effects
- User Selectable Equalizer
- USB-A for use with Thumb Drive Music Storage
- USB-A for charging mobile devices
- Built in Microphone for handsfree calling
- 3600mAh Rechargeable Battery provides 7 hours of music playback
- TWS True Wireless Stereo – connect 2 BT-500 Tubes together for true wireless stereo sound
- Shoulder Strap for easy carry
- USB-C Charge Cable included
-
APPLICATIONS
- MODEL 3 (2018 - 2024)
- MODEL Y (2020 - 2025)
- CYBER TRUCK
- MODEL 3 HIGHLAND
- MODEL Y JUNIPER
To check your fitment with our OE Series Direct Fit and Special Application Speaker please click the button below to view our OE SERIES FITMENT GUIDE. Please note Speakers may fit in other make / model applications other than those listed above, be sure to have a certified installer verify which size you have in your vehicle before purchase.
FITMENT GUIDE
-
APPLICATIONS
- MODEL 3 (2018 - 2024)
- MODEL Y (2020 - 2025)
- CYBER TRUCK
- MODEL 3 HIGHLAND
- MODEL Y JUNIPER
To check your fitment with our OE Series Direct Fit and Special Application Speaker please click the button below to view our OE SERIES FITMENT GUIDE. Please note Speakers may fit in other make / model applications other than those listed above, be sure to have a certified installer verify which size you have in your vehicle before purchase.
FITMENT GUIDE
- 900 Watt High Efficiency Full-Range Class D Design
- Front Load Terminal Design
- 2-OHM Stable Six Channel Amplifier
- Ultra Low Current Draw
- Double Sided Copper Plated PCB
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- Variable Subsonic Filter
- High Current Voltage Ripple Rejection Circuitry
- Balanced RCA Inputs
- Selectable Auto Turn On Circuit
- Remote Soft Delay Turn On/Off Circuit
- 40 Click Variable Detente High/Low Pass Electronic Crossover
- LPF / HPF / x10 BandPass Filter Selector Switch
- Variable Gain Control
- Calibrated Visual Clip Indicator
- Wired Secondary Remote Gain Control Included
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Digital Signal Processor for system integration.
- Wireless / APP Control compatible with PBX-DSP8.
- Auto Turn on with DC Offset
- High and Low level input
- Low Level user adjustable Outputs
- 8 Channels input / 8 channels output
- Amplifier remote turn on with user selectable delay
Processing Features:
- 32-Bit Digital Signal Processing
- 31 Band User Adjustable Equalization per channel
- User Adjustable Delay and Gain per channel
- User Adjustable Crossover Network with adjustable slopes 6 - 48db
- User Selectable Phase control per channel 0 / 180 degrees
- Adjustable input voltage per channel pairings 250mV - 9V
- 6.5" Pro Audio Compression Driver Co-Axial
- 1" Aluminum Compression Horn Tweeter
- Hybrid Carbon/DDC Treated Paper Cone
- Butyl Rubber Surround
- Compression Push Input Terminals
- 1.5" BASV Voice Coil
- 4-ohm Impedance
- 20oz. Y-35 Grade Motor Structure
- Vented Pole Piece
- Sold in Pairs
- Grill Included
