POWERBASS
SHOW
SORT BY
- 15" Dual 2-Ohm Xtreme Super Woofer
- 3,500 Watts RMS/7,0000 Watts Max
- Non-pressed Raw Paper Pulp DDC Coated Cone
- 4” HD BASV Flat Wound Voice Coil/Former
- U-Turn High Roll Treated Foam Surround
- Sextuplet 10" Progressive Roll Conex Surrounds
- Dual Nickel 5-way 4 gauge Pro-lock Input Terminals
- Massive Quad 160 oz Stacked MAgnets (40lbs/640 oz total)
- Hyper Extended One-Piece Vented Back Plate
- Heavy Duty Competition CNC Cut Cast Aluminum Frame
- Designed for Larger Ported Enclosures
- Works with both XL-POD8 & XL-POD65
- Fits most standard tubes
- Inserts included fit 1.5", 1.75", 1.87" and 2.375" diameter tubes
- Two of each size included
- 670 Watt 3 Channel High Efficiency Full-Range Class D Design
- 2-OHM Stable Stereo Amplifier
- International Rectifier® Chip Set
- Ultra Low Current Draw
- Double Sided Copper Plated PCB
- Conformal Coated PC Board
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- High Current Voltage Ripple Rejection Circuitry
- 3.5mm AUX Input
- Remote Soft Delay Turn On/Off Circuit
- Variable Low/High Pass Electronic Crossover
- Variable 18dB Bass Boost EQ
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
- 15" Dual 1-Ohm Xtreme Super Woofer
- 3,500 Watts RMS/7,0000 Watts Max
- Non-pressed Raw Paper Pulp DDC Coated Cone
- 4” HD BASV Flat Wound Voice Coil/Former
- U-Turn High Roll Treated Foam Surround
- Sextuplet 10" Progressive Roll Conex Surrounds
- Dual Nickel 5-way 4 gauge Pro-lock Input Terminals
- Massive Quad 160 oz Stacked MAgnets (40lbs/640 oz total)
- Hyper Extended One-Piece Vented Back Plate
- Heavy Duty Competition CNC Cut Cast Aluminum Frame
- Designed for Larger Ported Enclosures
- Marine Grade 6.5" 2-Way Pod Speakers
- Injection Molded UV-Treated White Polypropylene Cones
- Water Tight TPU Surround
- Ultra Efficient Compression Horn Tweeter
- UV Inhibited Injection Molded Plastic Pod
- UV-treated Aluminum Mesh Grills
- Polished Aluminum Mounting Clamps
- Fits Tower Bar Sizes 2" - 2.75" (will fit 1.5", 1.75", 1.875" & 2.375" w/XLPOD INSERTS sold separately)
- Stainless Steel Hardware Included
- 4-Ohm System Impedance
- Sold in Pairs w/Mounting Brackets
- Marine Grade 8" 2-Way Pod Speakers
- Injection Molded UV-Treated White Polypropylene Cones
- Water Tight TPU Surround
- Ultra Efficient Compression Horn Tweeter
- UV Inhibited Injection Molded Plastic Pod
- UV-treated Aluminum Mesh Grills
- Polished Aluminum Mounting Clamps
- Fits Tower Bar Sizes 2" - 2.75" (will fit 1.5", 1.75", 1.875" & 2.375" w/XLPOD INSERTS sold separately)
- Stainless Steel Hardware Included
- 4-Ohm System Impedance
- Sold in Pairs w/Mounting Brackets
- 10" Shallow Mount Single 4-Ohm Subwoofer
- 350 Watts RMS/700 Watts Max
- Proprietary Single Piece Injection Molded Flat Cone Design
- High Roll Santoprene® Surround
- 2.0" Vented KSV Voice Coil Former
- Perimeter Aero-Vent Voice Coil Cooling Vents
- Proprietary Non Resonance Polycarbonate/Glass Fiber Basket
- Chrome Push Terminals
- Optimally Designed for Small Sealed Enclosures
- 12" Shallow Mount Subwoofer
- 400 Watts RMS/800 Watts Max
- Proprietary Single Piece Injection Molded Flat Cone Design
- Proprietary Composite Poly/Glass Fiber Basket
- 2" Vented KSV Voice Coil Former
- Chrome Push Terminals
- 3.8" Mounting Depth
- 400 Watts RMS/800 Watts Max
- 2.4 Farad Digital Stiffening Capacitor
- Red 4 Digit LED Voltage Meter W/Polycarbonate Display Cover
- Supercharged Electrolytic Fluid
- Auto Turn On
- Mounting Clamps
- Platinum Power Connectors
- 20 VDC Voltage Rating
- 2.4 Farad
- 1.2 Farad Digital Stiffening Capacitor
- Red 4 Digit LED Voltage Meter W/Polycarbonate Display Cover
- Supercharged Electrolytic Fluid
- Auto Turn On
- Mounting Clamps
- Platinum Power Connectors
- 20 VDC Voltage Rating
- 1.2 Farad
- Marine Grade 6.5" Component Speakers
- Injection Molded UV-Treated White Polypropylene Cones
- TPO Thermoplastic Polyurethane Surround
- UV-Resistant Hi-Impact Integrated White Grills
- UV-Resistant White Polyamide Speaker Baskets
- UV-Resistant 1" Titanium Dome Water Proof Tweeter
- Water Proof Sealed Magnet Covers
- Gold Plated Input Terminals
- Marine Grade Passive 2-Way Crossover Network
- Stainless Steel Hardware Included
- 4-Ohm System Impedance
- Marine Grade 5.25" Co-Axial Speakers
- Injection Molded UV-Treated White Polypropylene Cones
- TPO Thermoplastic Polyurethane Surround
- UV-Resistant Hi-Impact Integrated White Grills
- UV-Resistant White Polyamide Speaker Baskets
- UV-Resistant Grill Mounted Sealed Tweeters, MET (Marine Engineered Technology) Titanium Dome Tweeters
- Water Proof Sealed Magnet Covers
- Gold Plated Input Terminals
- Stainless Steel Hardware Included
- 4-Ohm System Impedance
- Marine Grade 6.5" Co-Axial Speakers
- Injection Molded UV-Treated White Polypropylene Cones
- TPO Thermoplastic Polyurethane Surround
- UV-Resistant Hi-Impact Integrated White Grills
- UV-Resistant White Polyamide Speaker Baskets
- UV-Resistant Grill Mounted Sealed Tweeters, MET (Marine Engineered Technology) Titanium Dome Tweeters
- Water Proof Sealed Magnet Covers
- Gold Plated Input Terminals
- Stainless Steel Hardware Included
- 4-Ohm System Impedance
- Marine Grade 6 x 9" Co-Axial Speakers
- Injection Molded UV-Treated White Polypropylene Cones
- TPO Thermoplastic Polyurethane Surround
- UV-Resistant Hi-Impact Integrated White Grills
- UV-Resistant White Polyamide Speaker Baskets
- UV-Resistant Grill Mounted Sealed Tweeters, MET (Marine Engineered Technology) Titanium Dome Tweeters
- Water Proof Sealed Magnet Covers
- Gold Plated Input Terminals
- Stainless Steel Hardware Included
- 4-Ohm System Impedance
- Marine Grade 12" Subwoofer
- Injection Molded UV-Treated White Polypropylene Cone
- TPO Thermoplastic Polyurethane Surround
- 2.0" KSV Voice Coil Former
- 120 oz. Motor Structure
- Insulated Tinsel Leads
- Marine Grade Spider
- White Powder Coated Stamped Steel Baskets
- Gold Plated Input Terminals
- 250 Watts RMS/500 Watts Max
- Marine Grade 10" Subwoofer
- Injection Molded UV-Treated White Polypropylene Cone
- TPO Thermoplastic Polyurethane Surround
- 2.0" KSV Voice Coil Former
- 140 oz. Motor Structure
- Insulated Tinsel Leads
- Marine Grade Spider
- White Powder Coated Stamped Steel Baskets
- Gold Plated Input Terminals
- 200 Watts RMS/400 Watts Max
- 6.5" 3-Way Component Speaker System
- Hybrid 4 Layer Paper/Wool Blend Woofer Cone
- Butyl Rubber Surround
- Bilit Aluminum CNC Cut Phase Plug
- 14 oz. Y-35 Woofer Magnet
- EFF Motor Structures (Efficient Flux Field)
- Rigid Tooled Basket with Stainless Steel Finish
- 2.75" Soft Dome Mid-range Drivers
- Proprietary DDC Impregnated Mid-Range Membrane
- 1" Pivoting Silk Dome Tweeter w/Neodymium Magnet
- Computer Aided External 12dB 3-way Crossover Network
- 3-ohm System Impedance
- Conventional or Bi-Amplified Input
- 2-Channel 800 Watt High Efficiency Class A/B Design
- 2-ohm Stable (4-ohm in Bridged Mode)
- PWM MOSFET Power Supply
- Low Level RCA Input/Low Level RCA Pass Through Output
- High Level (Speaker)/Low Level (RCA) Input
- Remote Soft Delay Turn On/Off Circuit
- Variable High/Low Pass Electronic Crossover
- Variable 18dB Bass Boost EQ @ 45 Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
- Wired Secondary Remote Gain Control (Optional PB-GAIN1)
- Switchable Logo Back Lighting
- 10" Dual 4-Ohm Subwoofer
- 325 watt RMS/650 Watts Max
- Proprietary DDC Coated Non-Pressed Paper Cone
- Large Roll Santoprene® Surround
- 2" Vented BASV Voice Coil Former
- Perimeter Aero-Vent Voice Coil Cooling Vents
- Non Resonance DDC Coated Stamped Steel Basket
- Rubber Mounting Gasket/Trim Ring
- Chrome Push Terminals
- Optimally Designed for Both Small Sealed or Ported Enclosures
- 10" Single 4-Ohm Subwoofer
- 325 watt RMS/650 Watts Max
- Proprietary DDC Coated Non-Pressed Paper Cone
- Large Roll Santoprene® Surround
- 2" Vented BASV Voice Coil Former
- Perimeter Aero-Vent Voice Coil Cooling Vents
- Non Resonance DDC Coated Stamped Steel Basket
- Rubber Mounting Gasket/Trim Ring
- Chrome Push Terminals
- Optimally Designed for Both Small Sealed or Ported Enclosures