Mobile Audio

• 100’ 4 Gauge Ground Wire
• 882 Strands
• 50% OFC/50% CCA Blended Wire
• Flexible Brown Satin PVC Insulation Jacket

IN STOCK NOW!

• Extruded Aluminum Casing 
• Built-in Rechargeable Li-ion Battery 1900mAH
• Micro USB 5V Charging
• Enhanced Ported Bass Response
• 3.5mm Aux input 

• 4-Band Dual Zone Active Equalizer Bass, Mid-Bass, Mid, High
• 3 Zone Volume Control and Output 
• Variable Master Volume Control
• Front Panel Selectable Inputs - Bluetooth, Aux, RCA
• Front Panel Tri Illumination Selector - Red, Blue, Green
• Front Panel Track Selector - Track Up / Down
• 6V RMS output
• Bi-Polar PWM Power Supply
• Frequency Response: 20Hz-40KHz
• Selectable 120/80Hz Subwoofer Crossover
• Conformal Coated PCB 

IN STOCK NOW!

• 6.5" 3-Way Component Speaker System
• Hybrid 4 Layer Paper/Wool Blend Woofer Cone 
• Butyl Rubber Surround 
• Billet Aluminum CNC Cut Phase Plug
• 14 oz. Y-35 Woofer Magnet
• EFF Motor Structures (Efficient Flux Field) 
• Rigid Tooled Basket with Flat Black Finish
• 2.75" Soft Dome Mid-range Drivers
• Proprietary DDC Impregnated Mid-Range Membrane 
• 1"  Pivoting Silk Dome Tweeter w/Neodymium Magnet 
• Computer Aided External 12dB 3-way Crossover Network  
• 3-ohm System Impedance 
• Conventional or Bi-Amplified Input 

• 100A Output Circuit
• 400A Output Circuit linked to up to 4 units 
• 220V Input Voltage
• Built in Cooling Fans
• LCD Voltage Meter Included 
• Intelligent 3-Way Protection Circuit

• 100A Output Circuit
• 400A Output Circuit linked to up to 4 units 
• 120V Input Voltage
• Built in Cooling Fans
• LCD Voltage Meter Included 
• Intelligent 3-Way Protection Circuit

• New PBX logo dust cap
• 15" Dual 1-Ohm Subwoofer
• 1500 watt RMS/3000 Watts Max
• DDC Pressed Paper Cone
• High Roll Nitrile Butadine Rubber (NBR) Surrond
• 3.5” Vented HD BASV Voice Coil Former
• Perimeter Aero-Vent Voice Coil Cooling Vents
• Non Resonance DDC Coated Cast Aluminum Basket
• XTRA XTRA XTRA Large Triple Stacked Motor Structure
• Square Spring Loaded Nickel Plated Push Terminals
• Optimally Designed for Ported Enclosures 

• New PBX logo dust cap
• 15" Dual 2-Ohm Subwoofer
• 1500 watt RMS/3000 Watts Max
• DDC Pressed Paper Cone
• High Roll Nitrile Butadine Rubber (NBR) Surrond
• 3.5” Vented HD BASV Voice Coil Former
• Perimeter Aero-Vent Voice Coil Cooling Vents
• Non Resonance DDC Coated Cast Aluminum Basket
• XTRA XTRA XTRA Large Triple Stacked Motor Structure
• Square Spring Loaded Nickel Plated Push Terminals
• Optimally Designed for Ported Enclosures 

• New PBX logo dust cap
• 12" Dual 2-Ohm Subwoofer
• 1000 watt RMS/2000 Watts Max
• DDC Pressed Paper Cone
• High Roll Nitrile Butadine Rubber (NBR) Surrond
• 3” Vented HD BASV Voice Coil Former
• Perimeter Aero-Vent Voice Coil Cooling Vents
• Non Resonance DDC Coated Cast Aluminum Basket
• XTRA XTRA XTRA Large Triple Stacked Motor Structure
• Square Spring Loaded Nickel Plated Push Terminals
• Optimally Designed for Ported Enclosures 

• New PBX logo dust cap
• 12" Dual 1-Ohm Subwoofer
• 1000 watt RMS/2000 Watts Max
• DDC Pressed Paper Cone
• High Roll Nitrile Butadine Rubber (NBR) Surrond
• 3” Vented HD BASV Voice Coil Former
• Perimeter Aero-Vent Voice Coil Cooling Vents
• Non Resonance DDC Coated Cast Aluminum Basket
• XTRA XTRA XTRA Large Triple Stacked Motor Structure
• Square Spring Loaded Nickel Plated Push Terminals
• Optimally Designed for Ported Enclosures 

• New PBX logo dust cap
• 10" Dual 4-Ohm Subwoofer
• 400 watt RMS/800 Watts Max
• Woven Glass Fiber Cone With Pressed Kraft Paper Reinforcement
• Nitrile Butadiene Rubber (NBR) Surround
• 2.5" Vented BKSV Voice Coil Former
• Perimeter Aero-Vent Voice Coil Cooling Vents
• Non Resonance DDC Coated Cast Aluminum Basket
• XTRA XTRA Large Double Stacked Motor Structures
• Square Spring Loaded Nickel Plated Input Terminals 
• Optimally Designed for Small Sealed Enclosures
• Compact Design

• 12" Dual 4-Ohm Subwoofer
• 650 watt RMS / 1300 Watts Max
• Woven Glass Fiber Cone With Pressed Kraft Paper Reinforcement
• Nitrile Butadiene Rubber (NBR) Surround
• 2.5" Vented BKSV Voice Coil Former
• Perimeter Aero-Vent Voice Coil Cooling Vents
• Non Resonance DDC Coated Cast Aluminum Basket
• XTRA XTRA Large Double Stacked Motor Structures
• Square Spring Loaded Nickel Plated Input Terminals 
• Optimally Designed for Both Sealed or Ported Enclosures 

• Single 10" 175 Watt RMS Amplified Downfiring Enclosure
• Computer Optimized 10" Thin Subwoofer Enclosure
• Custom Injected Molded Cone
• Large Roll Rubber Surround
• 2" Vented KSV Voice Coil Former
• Perimeter Aero Voice Coil Venting
• Poly-carbonate/Glass Fiber Composite Turbine Basket
• Chrome Push Terminals
• 2-Tone Vinyl/Carpet Finish
• 1-Channel 275 Watt High Efficiency Class A/B Design
• High Level (Speaker)/Low Level RCA input
• Soft Delay Turn On/Off Circuit
• Auto Turn-on (high level input only)
• Variable Low Pass Electronic Crossover 50Hz - 200Hz
• Variable 12db Bass Boost EQ @ 45Hz
• Variable Gain Control
• Protection Circuit: Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
• Wired Remote Gain Control Included
• Down Firing Air Suspension Enclosure
• Heavy-Duty Reinforced Box Design
• Mounting Hardware Included 

IN STOCK NOW!

• 6.5" Pro Audio Mid-range Driver
• 2" Compression Horn Tweeters
• 12db Crossover network 
• Titanium Diaphragm - tweeter
• Die Cast Horn - tweeter
• Treated/DDC Paper Cone - mid range
• Acoustic Phase Plug
• Pro Audio Accordion Cloth Surround - mid range
• Chrome Push Input Terminals 
• 1.5" KSV Voice Coil - mid range
• 4-ohm System Impedance
• Stamped Steel Grill Included

IN STOCK NOW!

• 8" Pro Audio Mid-range
• Treated/DDC Paper Cone
• Acoustic Dispersion Phase Plug
• Pro Audio Accordion Cloth Surround
• Chrome Push Input Terminals 
• 1.5" KSV Voice Coil
• 4-ohm System Impedance
• Sold Individually 
• Stamped Steel Grill Sold Separately 

IN STOCK NOW!

• 6.5" Pro Audio Mid-range
• Treated/DDC Paper Cone
• Acoustic Dispersion Phase Plug
• Pro Audio Accordion Cloth Surround
• Chrome Push Input Terminals 
• 1.5" KSV Voice Coil
• 4-ohm System Impedance
• Sold Individually 
• Stamped Steel Grill Sold Seperately 

IN STOCK NOW!

• 2" Thin Mount Compression Horn Tweeter
• Die Cast Horn
• Titanium Diaphragm 
• CNC Aluminum Bullet Phase Plug Diffuser 
• 8 oz. Motor Structure
• Single 4-Ohm 
• 103 dB SPL
• 6 dB Crossover Included
• 4-ohm System Impedance 
• Sold Individually 

• 3,000 Watt High Efficiency Class D Design
• 1-OHM Stable Mono Block Amplifier
• Ultra Low Current Draw
• Double Sided Copper Plated PCB
• PWM MOSFET Power Supply
• Digital Sound Optimization Circuitry
• High Damping Control Circuit
• Variable Subsonic Filter
• High Current Voltage Ripple Rejection Circuitry
• Balanced RCA Inputs
• Auto Turn On/Off
• Remote Soft Delay Turn On/Off Circuit 
• 40 Click Variable Low Pass Electronic Crossover
• 40 Click Variable Frequency/18dB Bass Boost EQ
• Variable Gain Control
• Wired Secondary Remote Gain Control Included
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
• Strapable Dual Amp Power Doubling Circuit (Amp-to-Amp Bridged at 2 ohm minimum)