Mobile Audio

• Adjustable Aluminum Soundbar C-Clamps
• For use with XL Series Soundbars
• Fits 1.5" - 2.75" waketowers and roll bars
• Non-corrosive black powder coated aluminum  
• Stainless steel hardware included

• 990 Watt 5 Channel High Efficiency Full-Range Class D Design
• 2-OHM Stable Stereo Amplifier
• International Rectifier® Chip Set
• Ultra Low Current Draw
• Double Sided Copper Plated PCB
• Conformal Coated PC Board
• PWM MOSFET Power Supply
• Digital Sound Optimization Circuitry
• High Damping Control Circuit
• High Current Voltage Ripple Rejection Circuitry
• 3.5mm AUX Input
• Remote Soft Delay Turn On/Off Circuit 
• Variable Low/High Pass Electronic Crossover
• Variable 18dB Bass Boost EQ
• Variable Gain Control
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.

• 100’ 4 Gauge Ground Wire
• 882 Strands
• 50% OFC/50% CCA Blended Wire
• Flexible Black Satin PVC Insulation Jacket

• 230’ 8 Gauge Ground Wire
• 336 Strands
• 50% OFC/50% CCA Blended Wire
• Flexible Brown Satin PVC Insulation Jacket

• 500’ 16 Gauge Speaker Wire
• 60 Strands x 2
• 50% OFC/50% CCA Blended Wire
• Flexible Blue Satin PVC Insulation Jacket

• 330’ 12 Gauge Speaker Wire
• 135 Strands x 2
• 50% OFC/50% CCA Blended Wire
• Flexible Blue Satin PVC Insulation Jacket

• Single 8" 150 Watt RMS Amplified Under Seat Subwoofer Enclosure
• Extruded Aluminum  Enclosure with Dynamic Damping
• 8” Injection Molded PP Cone Woofer
• 1.5" KSV Voice Coil Former
• 1-Channel 150 Watt High Efficiency Class A/B Design
• High Level (Speaker)/Low Level (RCA) Input
• Soft Delay Turn On/Off Circuit
• Auto Turn-on (high level input only)
• Variable Low Pass Electronic Crossover
• Variable 12dB Bass Boost EQ @ 45 Hz
• Variable Gain Control
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
• Variable Wired Remote Gain Control Included
• Mounting Hardware Included
• 9.75"W x 2.75"H x 13.5"D

• Converts Speaker Level to Low Level RCA for our XMA and XL Amplifiers
• Easy Installation w/Pro-lock inputs

• 6x9" Thin Mount Co-Axial Speaker System
• OEM Drop in Replacement Design
• Grey Injection Molded PP/Carbon Fiber Cone 
• Butyl Rubber Surround 
• 10 oz. Motor Structure
• Shallow Mounting Depth 
• EFF Motor Structures (Efficient Flux Field) 
• Rigid Tooled Basket With Flat Black Finish 
• 0.75" Aluminum Dome Tweeter
• SEL Tweeter Ring (Sound Expander Lens)
• 2-ohm System Impedance 

• 7" Woofer/Speaker System
• OEM Drop in Replacement Design
• Grey Injection Molded PP/Carbon Fiber Cone 
• Butyl Rubber Surround 
• 16 oz. Motor Structure
• Shallow Mounting Depth 
• EFF Motor Structures (Efficient Flux Field) 
• Rigid Tooled Basket With Flat Black Finish 
• 2-ohm System Impedance 

• Heavy Duty OFC (Oxygen Free Copper) Wiring Kit
• 60 Amp Mini ANL Fuse & Holder W/Clear Acrylic Cover
• 17' Twisted Pair Triple Shield Braided RCA Cable
• 17' 8 Gauge Orange-Flex Power Wire
• 7' 8 Gauge Black-Flex Ground Wire
• 17' Orange-Flex Speaker Wire
• 6' Black Flex Loom Tubing
• Gold Terminal Conectors

Heavy Duty OFC (Oxygen Free Copper) Wiring Kit

• 80 Amp Mini ANL Fuse & Holder W/Clear Acrylic Cover
• 17' Twisted Pair Triple Shield Braided RCA Cable
• 17' 4 Gauge Orange-Flex Power Wire
• 7' 4 Gauge Black-Flex Ground Wire
• 17' 16 Gauge Orange-Flex Speaker Wire
• 6' Black Flex Loom Tubing
• Gold Terminal Conectors

• 12" Single 4-Ohm Woofer
• 250 watt RMS/500 Watts Max
• DDC Treated Paper Cone
• 4-Layer Treated Foam Surround 
• 2" BASV Voice Coil Former
• Stamped Steel Basket
• Optimized for Sealed or Ported Enclosures 

• 10" Single 4-Ohm Woofer
• 225 watt RMS/450 Watts Max
• DDC Treated Paper Cone
• 4-Layer Treated Foam Surround 
• 2" BASV Voice Coil Former
• Stamped Steel Basket
• Optimized for Sealed or Ported Enclosures 

• Computer Optimized 10" Thin Subwoofer Enclosure
• 275 watt RMS/550 Watts Max
• One Piece Injection Molded Cone
• Single Piece Custom Injected Molded Cone
• Large Roll Rubber Surround
• 2" Vented KSV Voice Coil Former
• Perimeter Aero Voice Coil Venting
• Poly-carbonate/Glass Fiber Composite Turbine Basket
• Chrome Push Terminals
• 2-Tone Vinyl/Carpet Finish
• Down Firing Air Suspension Enclosure
• Heavy-Duty Reinforced Box Design
• Single 4-ohm Input

• 3" Soft Dome Mid-range Drivers
• Proprietary DDC Impregnated Membrane 
• Ultra Efficient Neodymium Magnet
• 6dB Inline Crossover Included
• 4-Ohm System Impedance

• Heavy Duty 8 Gauge 50% CCA/50% OFC (Copper Clad Aluminum/Oxygen Free Copper) Blend Amplifier Installation Kit
• 60 Amp AGU Fuse W/Clear Water Proof In-Line Fuse Holder
• 17' Twisted Pair Triple Shield Braided RCA Cable
• 17' 8 Gauge Blue-Flex Power Wire
• 7' 8 Gauge Black-Flex Ground Wire
• 20' Blue-Flex Speaker Wire
• 6' Black Flex Loom Tubing
• Gold Terminal Conectors

• Heavy Duty 4 Gauge 50% CCA/50% OFC (Copper Clad Aluminum/Oxygen Free Copper) Blend Amplifier Installation Kit
• 80 Amp AGU Fuse W/Clear Water Proof In-Line Fuse Holder
• 17' Twisted Pair Triple Shield Braided RCA Cable
• 17' 8 Gauge Blue-Flex Power Wire
• 7' 8 Gauge Black-Flex Ground Wire
• 20' Blue-Flex Speaker Wire
• 6' Black Flex Loom Tubing
• Gold Terminal Conectors

• Remote Wired Variable Level Controller (secondary gain control)
• Includes Bass Knob, Cable & Mounting Screws
• For use with the following PowerBass amplifier series:
  • ASA Amplifiers
  • ASA3 Amplifiers
  • ACS Amplifiers

• 4-Channel High to Low Level Active Converter
• 2CH/4CH Selector Switch
• Front/Rear High Level Inputs
• Front/Rear Variable Gain
• Front/Rear RCA Low Level Output
• LED Clipping Indicator
• Includes Wired Variable Remote Level Control (Rear)
• Auto Turn-On Circuitry 
• Variable 13Vrms Output