POWERBASS
Mobile Audio
SHOW
SORT BY
FILTER
- 6x9" Tri-Axial Speaker System
- OEM Drop in Replacement Design
- Black 2-layer Paper, DDC (Dynamic Damping Coating) Cone
- Double Pressed Treated Foam Surround
- 10 oz. Motor Structure
- Shallow Mounting Depth
- EFF Motor Structures (Efficient Flux Field)
- Rigid Tooled Basket With Flat Black Finish
- 2" PEI Dome Mid-range and 0.75” Tweeter
- SEL Tweeter Ring (Sound Expander Lens)
- 4-ohm System Impedance
- 4" Co-Axial Speaker System
- OEM Drop in Replacement Design
- Hybrid 4 Layer Paper/Wool Blend Woofer Cone
- Butyl Rubber Surround
- 10 oz. Motor Structure
- EFF Motor Structures (Efficient Flux Field)
- Rigid Tooled Basket With Flat Black Finish
- 1" Silk Dome Tweeter
- 3-ohm System Impedance
- 4x6" Co-Axial Speaker System
- OEM Drop in Replacement Design
- Hybrid 4 Layer Paper/Wool Blend Woofer Cone
- Butyl Rubber Surround
- 10 oz. Motor Structure
- EFF Motor Structures (Efficient Flux Field)
- Rigid Tooled Basket With Flat Black Finish
- 1" Silk Dome Tweeter
- 3-ohm System Impedance
- 5.25" Co-Axial Speaker System
- OEM Drop in Replacement Design
- Hybrid 4 Layer Paper/Wool Blend Woofer Cone
- Butyl Rubber Surround
- 12 oz. Motor Structure
- EFF Motor Structures (Efficient Flux Field)
- Rigid Tooled Basket With Flat Black Finish
- 1" Silk Dome Tweeter
- 3-ohm System Impedance
- 89dB SPL
- 62Hz - 20kHz Frequency Response
- 60 Watts RMS/120 Watts Max
- 6.5" Thin Mount Co-Axial Speaker System
- OEM Drop in Replacement Design
- Hybrid 4 Layer Paper/Wool Blend Woofer Cone
- Butyl Rubber Surround
- 12 oz. Motor Structure
- EFF Motor Structures (Efficient Flux Field)
- Rigid Tooled Basket With Flat Black Finish
- 1" Silk Dome Tweeter
- 3-ohm System Impedance
- 6.5" Co-Axial Speaker System
- OEM Drop in Replacement Design
- Hybrid 4 Layer Paper/Wool Blend Woofer Cone
- Butyl Rubber Surround
- 14 oz. Motor Structure
- EFF Motor Structures (Efficient Flux Field)
- Rigid Tooled Basket With Flat Black Finish
- 1" Silk Dome Tweeter
- 3-ohm System Impedance
- 6.75" Co-Axial Speaker System
- OEM Drop in Replacement Design
- Hybrid 4 Layer Paper/Wool Blend Woofer Cone
- Butyl Rubber Surround
- 12 oz. Motor Structure
- EFF Motor Structures (Efficient Flux Field)
- Rigid Tooled Basket With Flat Black Finish
- 1" Silk Dome Tweeter
- 3-ohm System Impedance
- 6x8" Co-Axial Speaker System
- OEM Drop in Replacement Design
- Hybrid 4 Layer Paper/Wool Blend Woofer Cone
- Butyl Rubber Surround
- 14 oz. Motor Structure
- EFF Motor Structures (Efficient Flux Field)
- Rigid Tooled Basket With Flat Black Finish
- 1" Silk Dome Tweeter
- 3-ohm System Impedance
- 6x9" Co-Axial Speaker System
- OEM Drop in Replacement Design
- Hybrid 4 Layer Paper/Wool Blend Woofer Cone
- Butyl Rubber Surround
- 30 oz. Motor Structure
- EFF Motor Structures (Efficient Flux Field)
- Rigid Tooled Basket With Flat Black Finish
- 1" Silk Dome Tweeter
- 3-ohm System Impedance
- 1,000 Watt High Efficiency Class D Design
- 1-OHM Stable Mono Block Amplifier
- MOSFET Power Supply
- High Level (Speaker)/Low Level (RCA) Input
- Remote Soft Delay Turn On/Off Circuit
- Variable Low Pass Electronic Crossover
- Selectable 12dB Bass Boost EQ
- Variable Gain Control
- Remote Level Control Port (for optional PB-GAIN1 controller)
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
- 500 Watt High Efficiency Class D Design
- 1-OHM Stable Mono Block Amplifier
- MOSFET Power Supply
- High Level (Speaker)/Low Level (RCA) Input
- Remote Soft Delay Turn On/Off Circuit
- Variable Low Pass Electronic Crossover
- Selectable 12dB Bass Boost EQ
- Variable Gain Control
- Remote Level Control Port (for optional PB-GAIN1 controller)
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
- 2-Channel 240 Watt High Efficiency Class A/B Design
- 2-ohm Stable (4-ohm in Bridged Mode)
- PWM MOSFET Power Supply
- High Level (Speaker)/Low Level (RCA) Input
- Remote Soft Delay Turn On/Off Circuit
- Variable High/Low Pass Electronic Crossover
- Selectable 12dB Bass Boost EQ
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
- 4-Channel 480 Watt High Efficiency Class A/B Design
- 2-ohm Stable (4-ohm in Bridged Mode)
- PWM MOSFET Power Supply
- High Level (Speaker)/Low Level (RCA) Input
- Remote Soft Delay Turn On/Off Circuit
- Variable High/Low Pass Electronic Crossover
- Selectable 12dB Bass Boost EQ
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
- 400 Watt High Efficiency Class A/B Design
- 2-OHM Stable Mono Block Amplifier
- PWM MOSFET Power Supply
- Low Level RCA Input/Low Level RCA Pass Through Output
- Remote Soft Delay Turn On/Off Circuit
- Variable Low Pass Electronic Crossover
- Variable 12dB Bass Boost EQ
- Variable Gain Control
- Wired Secondary Remote Gain Control Included
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
- Switchable Logo Back Lighting
- 600 Watt High Efficiency Class A/B Design
- 2-OHM Stable Mono Block Amplifier
- PWM MOSFET Power Supply
- Low Level RCA Input/Low Level RCA Pass Through Output
- Remote Soft Delay Turn On/Off Circuit
- Variable Low Pass Electronic Crossover
- Variable 12dB Bass Boost EQ
- Variable Gain Control
- Wired Secondary Remote Gain Control Included
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
- Switchable Logo Back Lighting
- 600 Watt High Efficiency Class D Design
- 1-OHM Stable Mono Block Amplifier
- Double Sided Circuit Board Construction
- PWM MOSFET Power Supply
- Low Level RCA Input/Low Level RCA Pass Through Output
- Remote Soft Delay Turn On/Off Circuit
- Variable Low Pass Electronic Crossover
- Variable 12dB Bass Boost EQ
- Variable Gain Control
- Wired Secondary Remote Gain Control Included
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
- Strapable Dual Amp Power Doubling Circuit (Amp-to-Amp Bridged at 2 ohm minimum)
- Switchable Logo Back Lighting
- 1,000 Watt High Efficiency Class D Design
- 1-OHM Stable Mono Block Amplifier
- Double Sided Circuit Board Construction
- PWM MOSFET Power Supply
- Low Level RCA Input/Low Level RCA Pass Through Output
- Remote Soft Delay Turn On/Off Circuit
- Variable Low Pass Electronic Crossover
- Variable 12dB Bass Boost EQ
- Variable Gain Control
- Wired Secondary Remote Gain Control Included
- Internal Thermal Cooling Fan
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
- Strapable Dual Amp Power Doubling Circuit (Amp-to-Amp Bridged at 2 ohm minimum)
- Switchable Logo Back Lighting
- 1,500 Watt High Efficiency Class D Design
- 1-OHM Stable Mono Block Amplifier
- Double Sided Circuit Board Construction
- PWM MOSFET Power Supply
- Low Level RCA Input/Low Level RCA Pass Through Output
- Remote Soft Delay Turn On/Off Circuit
- Variable Low Pass Electronic Crossover
- Variable 12dB Bass Boost EQ
- Variable Gain Control
- Wired Secondary Remote Gain Control Included
- Internal Thermal Cooling Fan
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
- Strapable Dual Amp Power Doubling Circuit (Amp-to-Amp Bridged at 2 ohm minimum)
- Switchable Logo Back Lighting
- 2-Channel 200 Watt High Efficiency Class A/B Design
- 2-ohm Stable (4-ohm in Bridged Mode)
- PWM MOSFET Power Supply
- Low Level RCA Input/Low Level RCA Pass Through Output
- Remote Soft Delay Turn On/Off Circuit
- Variable High/Low Pass Electronic Crossover
- Variable 18dB Bass Boost EQ @ 45 Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
- Wired Secondary Remote Gain Control (Optional PB-GAIN1)
- Switchable Logo Back Lighting
- 2-Channel 300 Watt High Efficiency Class A/B Design
- 2-ohm Stable (4-ohm in Bridged Mode)
- PWM MOSFET Power Supply
- Low Level RCA Input/Low Level RCA Pass Through Output
- Remote Soft Delay Turn On/Off Circuit
- Variable High/Low Pass Electronic Crossover
- Variable 18dB Bass Boost EQ @ 45 Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
- Wired Secondary Remote Gain Control (Optional PB-GAIN1)
- Switchable Logo Back Lighting