XL-RC1 Polaris Ride Command Adaptor
- Plug and Play Ride Command Adaptor
- Ride Command to Female RCA output
- Works with XL Series Amplifiers
- Works with XL-50 v2 Series Soundbars
Home > Products > Audio accessories >
XL-RC1 Polaris Ride Command Adaptor
Read more
XL-RC1 Polaris Ride Command ® Adaptor
Direct plug in design to adapt from Polaris Ride Command to RCA output.
With the XL-RC1 adding your PowerBass Amplifier or Soundbar to work with your factory Polaris Ride Command is as simple. Plug in the XL-TC1 to the back of your Ride Command on the extra output and now you are set with Female RCA outputs as well as an amp turn on lead.
*note the Polaris Ride Command system has been known to have limited impedance matching range when using some aftermarket equipment. If the input is not in range problems may occur. Use of this product does not guarantee 100% compatibility for all aftermarket electronics.
Specifications
Downloads
XL-RC1 Polaris Ride Command Adaptor
Recommended Products
- Waterproof design IPX7
- Bluetooth 5.0 Chip provides 30Ft. of wireless range
- Dual 1500mAh Rechargeable Battery’s provide 10 hours of music playback
- TWS True Wireless Stereo
- SPLIT the BT-200 into 2 speakers for Modular Stereo Sound
- Dual Passive Radiators for enhanced Bass Response
- Rubber Bumper Cover for Rugged Protection.
- Dual USB-A to USB-C Charge Cable included
- Waterproof design IPX7
- Bluetooth 5.3 Chip provides 30Ft. of wireless range
- RGB Lighting with User Selectable Effects
- User Selectable Equalizer
- USB-A for use with Thumb Drive Music Storage
- USB-A for charging mobile devices
- Built in Microphone for handsfree calling
- 3600mAh Rechargeable Battery provides 7 hours of music playback
- TWS True Wireless Stereo – connect 2 BT-500 Tubes together for true wireless stereo sound
- Shoulder Strap for easy carry
- USB-C Charge Cable included
-
APPLICATIONS
- MODEL 3 (2018 - 2024)
- MODEL Y (2020 - 2025)
- CYBER TRUCK
- MODEL 3 HIGHLAND
- MODEL Y JUNIPER
To check your fitment with our OE Series Direct Fit and Special Application Speaker please click the button below to view our OE SERIES FITMENT GUIDE. Please note Speakers may fit in other make / model applications other than those listed above, be sure to have a certified installer verify which size you have in your vehicle before purchase.
FITMENT GUIDE
-
APPLICATIONS
- MODEL 3 (2018 - 2024)
- MODEL Y (2020 - 2025)
- CYBER TRUCK
- MODEL 3 HIGHLAND
- MODEL Y JUNIPER
To check your fitment with our OE Series Direct Fit and Special Application Speaker please click the button below to view our OE SERIES FITMENT GUIDE. Please note Speakers may fit in other make / model applications other than those listed above, be sure to have a certified installer verify which size you have in your vehicle before purchase.
FITMENT GUIDE
- 900 Watt High Efficiency Full-Range Class D Design
- Front Load Terminal Design
- 2-OHM Stable Six Channel Amplifier
- Ultra Low Current Draw
- Double Sided Copper Plated PCB
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- Variable Subsonic Filter
- High Current Voltage Ripple Rejection Circuitry
- Balanced RCA Inputs
- Selectable Auto Turn On Circuit
- Remote Soft Delay Turn On/Off Circuit
- 40 Click Variable Detente High/Low Pass Electronic Crossover
- LPF / HPF / x10 BandPass Filter Selector Switch
- Variable Gain Control
- Calibrated Visual Clip Indicator
- Wired Secondary Remote Gain Control Included
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Digital Signal Processor for system integration.
- Wireless / APP Control compatible with PBX-DSP8.
- Auto Turn on with DC Offset
- High and Low level input
- Low Level user adjustable Outputs
- 8 Channels input / 8 channels output
- Amplifier remote turn on with user selectable delay
Processing Features:
- 32-Bit Digital Signal Processing
- 31 Band User Adjustable Equalization per channel
- User Adjustable Delay and Gain per channel
- User Adjustable Crossover Network with adjustable slopes 6 - 48db
- User Selectable Phase control per channel 0 / 180 degrees
- Adjustable input voltage per channel pairings 250mV - 9V
- 6.5" Pro Audio Compression Driver Co-Axial
- 1" Aluminum Compression Horn Tweeter
- Hybrid Carbon/DDC Treated Paper Cone
- Butyl Rubber Surround
- Compression Push Input Terminals
- 1.5" BASV Voice Coil
- 4-ohm Impedance
- 20oz. Y-35 Grade Motor Structure
- Vented Pole Piece
- Sold in Pairs
- Grill Included
