POWERBASS
Products
SHOW
SORT BY
FILTER
- New PBX logo dust cap
- 10" Dual 4-Ohm Subwoofer
- 400 watt RMS/800 Watts Max
- Woven Glass Fiber Cone With Pressed Kraft Paper Reinforcement
- Nitrile Butadiene Rubber (NBR) Surround
- 2.5" Vented BKSV Voice Coil Former
- Perimeter Aero-Vent Voice Coil Cooling Vents
- Non Resonance DDC Coated Cast Aluminum Basket
- XTRA XTRA Large Double Stacked Motor Structures
- Square Spring Loaded Nickel Plated Input Terminals
- Optimally Designed for Both Small Sealed or Ported Enclosures
- Compact Design
- New PBX logo dust cap
- 12" Dual 4-Ohm Subwoofer
- 450 watt RMS/900 Watts Max
- Woven Glass Fiber Cone With Pressed Kraft Paper Reinforcement
- Nitrile Butadiene Rubber (NBR) Surround
- 2.5" Vented BKSV Voice Coil Former
- Perimeter Aero-Vent Voice Coil Cooling Vents
- Non Resonance DDC Coated Cast Aluminum Basket
- XTRA XTRA Large Double Stacked Motor Structures
- Square Spring Loaded Nickel Plated Input Terminals
- Optimally Designed for Both Small Sealed or Ported Enclosures
- Compact Design
- Single 10" 175 Watt RMS Amplified Downfiring Enclosure
- Computer Optimized 10" Thin Subwoofer Enclosure
- Custom Injected Molded Cone
- Large Roll Rubber Surround
- 2" Vented KSV Voice Coil Former
- Perimeter Aero Voice Coil Venting
- Poly-carbonate/Glass Fiber Composite Turbine Basket
- Chrome Push Terminals
- 2-Tone Vinyl/Carpet Finish
- 1-Channel 275 Watt High Efficiency Class A/B Design
- High Level (Speaker)/Low Level RCA input
- Soft Delay Turn On/Off Circuit
- Auto Turn-on (high level input only)
- Variable Low Pass Electronic Crossover 50Hz - 200Hz
- Variable 12db Bass Boost EQ @ 45Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
- Wired Remote Gain Control Included
- Down Firing Air Suspension Enclosure
- Heavy-Duty Reinforced Box Design
- Mounting Hardware Included
IN STOCK NOW!
- 6.5" Pro Audio Mid-range Driver
- 2" Compression Horn Tweeters
- 12db Crossover network
- Titanium Diaphragm - tweeter
- Die Cast Horn - tweeter
- Treated/DDC Paper Cone - mid range
- Acoustic Phase Plug
- Pro Audio Accordion Cloth Surround - mid range
- Chrome Push Input Terminals
- 1.5" KSV Voice Coil - mid range
- 4-ohm System Impedance
- Stamped Steel Grill Included
IN STOCK NOW!
- 8" Pro Audio Mid-range
- Treated/DDC Paper Cone
- Acoustic Dispersion Phase Plug
- Pro Audio Accordion Cloth Surround
- Chrome Push Input Terminals
- 1.5" KSV Voice Coil
- 4-ohm System Impedance
- Sold Individually
- Stamped Steel Grill Sold Separately
IN STOCK NOW!
- 6.5" Pro Audio Mid-range
- Treated/DDC Paper Cone
- Acoustic Dispersion Phase Plug
- Pro Audio Accordion Cloth Surround
- Chrome Push Input Terminals
- 1.5" KSV Voice Coil
- 4-ohm System Impedance
- Sold Individually
- Stamped Steel Grill Sold Seperately
- 15" Dual 2-Ohm Xtreme Super Woofer
- 3,500 Watts RMS/7,0000 Watts Max
- Non-pressed Raw Paper Pulp DDC Coated Cone
- 4” HD BASV Flat Wound Voice Coil/Former
- U-Turn High Roll Treated Foam Surround
- Sextuplet 10" Progressive Roll Conex Surrounds
- Dual Nickel 5-way 4 gauge Pro-lock Input Terminals
- Massive Quad 160 oz Stacked MAgnets (40lbs/640 oz total)
- Hyper Extended One-Piece Vented Back Plate
- Heavy Duty Competition CNC Cut Cast Aluminum Frame
- Designed for Larger Ported Enclosures
IN STOCK NOW!
- 2" Thin Mount Compression Horn Tweeter
- Die Cast Horn
- Titanium Diaphragm
- CNC Aluminum Bullet Phase Plug Diffuser
- 8 oz. Motor Structure
- Single 4-Ohm
- 103 dB SPL
- 6 dB Crossover Included
- 4-ohm System Impedance
- Sold Individually
- 3,000 Watt High Efficiency Class D Design
- 1-OHM Stable Mono Block Amplifier
- Ultra Low Current Draw
- Double Sided Copper Plated PCB
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- Variable Subsonic Filter
- High Current Voltage Ripple Rejection Circuitry
- Balanced RCA Inputs
- Auto Turn On/Off
- Remote Soft Delay Turn On/Off Circuit
- 40 Click Variable Low Pass Electronic Crossover
- 40 Click Variable Frequency/18dB Bass Boost EQ
- Variable Gain Control
- Wired Secondary Remote Gain Control Included
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Strapable Dual Amp Power Doubling Circuit (Amp-to-Amp Bridged at 2 ohm minimum)
COMING 2019
- Soundbar / POD Thin Mount Clamps
- Perfect for Under Roof Mount Applications
- For use with the XL Soundbars, or XL POD models
- Fits 1.5", 1.75", 2" round bars
- Non-corrosive black powder coating
- hardware included
COMING 2019
- Soundbar / POD Square Clamps
- Perfect for Golf Cart Applications
- For use with the XL Soundbars, or XL POD models
- Fits 0.75", 1.0", 1.25" square bars
- Non-corrosive black powder coating
- hardware included
IN STOCK NOW!
- 12 Speaker 500 watt Amplified Bluetooth Powersports Soundbar
- 6 x 3.5" Square Poly Cone Woofers
- 2 x 3” Full Range Marine Grade Poly Cone Speakers
- 4 x 1” SD Mylar Tweeters
- Heavy Duty Extruded Aluminum Water Tight Housing
- LED back-lit Control Panel
- LED Visual Notifications
- Audible Power On/Off Notifications
- Built In DSP Processor w/Distortion Limiter
- Bluetooth and Wired Inputs
- 2 Volt Line Output
- Auto Turn On/Off Circuit
- Waterproof Wire Loom Connectors
- Universal L-Bracket Mounting System Included
- Universal Top or Bottom Mount Clamp Style Brackets (Sold Separately XL-SBCLAMP, XL-SBTCLAMP, XL-SBSCLAMP)
- Secondary Dash Mountable Controller Pad (Sold Separately XL-SBCON)
- 4-Channel 480 Watt High Efficiency Class A/B Design
- 2-ohm Stable (4-ohm in Bridged Mode)
- PWM MOSFET Power Supply
- High Level (Speaker)/Low Level (RCA) Input
- Remote Soft Delay Turn On/Off Circuit
- Variable High/Low Pass Electronic Crossover
- Selectable 12dB Bass Boost EQ
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
- New PBX logo dust cap
- 10" Shallow Mount Single 4-Ohm Subwoofer
- 350 Watts RMS/700 Watts Max
- Proprietary Single Piece Injection Molded Flat Cone Design
- High Roll Santoprene® Surround
- 2.0" Vented KSV Voice Coil Former
- Perimeter Aero-Vent Voice Coil Cooling Vents
- Proprietary Non Resonance Polycarbonate/Glass Fiber Basket
- Chrome Push Terminals
- Optimally Designed for Small Sealed Enclosures
- New PBX logo dust cap
- 12" Shallow Mount Subwoofer Single 4-Ohm Subwoofer
- 400 Watts RMS/800 Watts Max
- Proprietary Single Piece Injection Molded Flat Cone Design
- Proprietary Composite Poly/Glass Fiber Basket
- 2" Vented KSV Voice Coil Former
- Chrome Push Terminals
- 3.8" Mounting Depth
- 400 Watts RMS/800 Watts Max
- New PBX dust cap
- New Polycarbonate Glass Fiber Basket
- Marine Grade 12" Subwoofer
- White powder coated aluminum grill included
- Injection Molded UV-Treated White Polypropylene Cone
- TPO Thermoplastic Polyurethane Surround
- 2.0" KSV Voice Coil Former
- 120 oz. Motor Structure
- Insulated Tinsel Leads
- Marine Grade Spider
- 250 Watts RMS/500 Watts Max
- Designed for FREE AIR applications and Sealed Enclosures
- New PBX dust cap
- 12" 4-Ohm Subwoofer
- 400 watt RMS/800 Watts Max
- Proprietary Non-pressed Paper DDC Coated Cone
- High Roll Santoprene® Surround
- 2.0" Vented BASV Voice Coil Former
- Perimeter Aero-Vent Voice Coil Cooling Vents
- Proprietary Non Resonance Polycarbonate/Glass Fiber Basket
- Chrome Push Terminals
- Optimally Designed for Both Small Sealed or Ported Enclosures
- New PBX dust cap
- 12" Dual 4-Ohm Subwoofer
- 400 watt RMS/800 Watts Max
- Proprietary Non-pressed Paper DDC Coated Cone
- High Roll Santoprene® Surround
- 2.0" Vented BASV Voice Coil Former
- Perimeter Aero-Vent Voice Coil Cooling Vents
- Proprietary Non Resonance Polycarbonate/Glass Fiber Basket
- Chrome Push Terminals
- Optimally Designed for Both Small Sealed or Ported Enclosures
- New PBX dust cap
- New Polycarbonate Glass Fiber Basket
- Marine Grade 10" Subwoofer
- White powder-coated Aluminum grill included
- Injection Molded UV-Treated White Polypropylene Cone
- TPO Thermoplastic Polyurethane Surround
- 2.0" KSV Voice Coil Former
- 140 oz. Motor Structure
- Insulated Tinsel Leads
- Marine Grade Spider
- 200 Watts RMS/400 Watts Max
- Designed for FREE AIR Applications and Sealed Enclosures
- New PBX Dust Cap
- 10" 4-Ohm Subwoofer
- 350 watt RMS/700 Watts Max
- Proprietary Non-pressed Paper DDC Coated Cone
- High Roll Santoprene® Surround
- 2.0" Vented BASV Voice Coil Former
- Perimeter Aero-Vent Voice Coil Cooling Vents
- Proprietary Non Resonance Polycarbonate/Glass Fiber Basket
- Chrome Push Terminals
- Optimally Designed for Both Small Sealed or Ported Enclosures