XL-PS2CLAMP Universal C-Clamp For XL-PS200
- Compatible with the XL-PS200 Speaker Pods
- Direct Fit Bolt in Design
- Replaces the stock mounting bracket
- Fits Round and Square tubing
- Adjustable from 1.25" - 2.0"
- Hardware Included
Home > Products > Xl powersports >
XL-PS2CLAMP Universal C-Clamp For XL-PS200
Read more
XL-PS2CLAMP Adjustable C-Clamp for XL-PS200
The PowerBass XL-PS200 were designed to fit with stock American and Import motorcycle handle bars, however with the ever growing popularity of "fatter" aftermarket bars PowerBass has you covered with the new XL-PS2CLAMP
The XL-PS2CLAMP replaces the stock mounting system with a bolt in design giving you more mounting options. Ranging from 1.25" up to 2.0" in fitment you can attach your XL-PS200 to round or square tubes for secure fitment onto Motorcycles, ATVs, UTV, or even Golf Carts!
Give your bike the sound upgrade you need in no time with the XL-PS200 and the XL-PS2CLAMP
Specifications
- Size: 1.25" - 2.0"
Downloads
XL-PS2CLAMP Universal Powersports C-Clamp For XL-PS200 Bluetooth Speaker Pods
Recommended Products
- Waterproof design IPX7
- Bluetooth 5.0 Chip provides 30Ft. of wireless range
- Dual 1500mAh Rechargeable Battery’s provide 10 hours of music playback
- TWS True Wireless Stereo
- SPLIT the BT-200 into 2 speakers for Modular Stereo Sound
- Dual Passive Radiators for enhanced Bass Response
- Rubber Bumper Cover for Rugged Protection.
- Dual USB-A to USB-C Charge Cable included
- Waterproof design IPX7
- Bluetooth 5.3 Chip provides 30Ft. of wireless range
- RGB Lighting with User Selectable Effects
- User Selectable Equalizer
- USB-A for use with Thumb Drive Music Storage
- USB-A for charging mobile devices
- Built in Microphone for handsfree calling
- 3600mAh Rechargeable Battery provides 7 hours of music playback
- TWS True Wireless Stereo – connect 2 BT-500 Tubes together for true wireless stereo sound
- Shoulder Strap for easy carry
- USB-C Charge Cable included
-
APPLICATIONS
- MODEL 3 (2018 - 2024)
- MODEL Y (2020 - 2025)
- CYBER TRUCK
- MODEL 3 HIGHLAND
- MODEL Y JUNIPER
To check your fitment with our OE Series Direct Fit and Special Application Speaker please click the button below to view our OE SERIES FITMENT GUIDE. Please note Speakers may fit in other make / model applications other than those listed above, be sure to have a certified installer verify which size you have in your vehicle before purchase.
FITMENT GUIDE
-
APPLICATIONS
- MODEL 3 (2018 - 2024)
- MODEL Y (2020 - 2025)
- CYBER TRUCK
- MODEL 3 HIGHLAND - *note some productions have 8" harness key on opposite side see below
- MODEL Y JUNIPER - *note some productions have 8" harness key on opposite side see below
*2026 Highland and Juniper ALL China built Right Hand Drive and Some Late 26' productions from the USA Factories we have found some Highland 3 and Juniper Y vehicles are now equipped with updated harnesses for the 8" plug resulting in the guide "key" position on the opposite side of the current plug. We expect the new "premium" Model Y L will also use this harness configuration. Currently the solution is to trim off the key and the plug will lock into place without issue, the Polarity remains unchanged. Further revision is in development at this time.
To check your fitment with our OE Series Direct Fit and Special Application Speaker please click the button below to view our OE SERIES FITMENT GUIDE. Please note Speakers may fit in other make / model applications other than those listed above, be sure to have a certified installer verify which size you have in your vehicle before purchase.
FITMENT GUIDE
- 900 Watt High Efficiency Full-Range Class D Design
- Front Load Terminal Design
- 2-OHM Stable Six Channel Amplifier
- Ultra Low Current Draw
- Double Sided Copper Plated PCB
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- Variable Subsonic Filter
- High Current Voltage Ripple Rejection Circuitry
- Balanced RCA Inputs
- Selectable Auto Turn On Circuit
- Remote Soft Delay Turn On/Off Circuit
- 40 Click Variable Detente High/Low Pass Electronic Crossover
- LPF / HPF / x10 BandPass Filter Selector Switch
- Variable Gain Control
- Calibrated Visual Clip Indicator
- Wired Secondary Remote Gain Control Included
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Digital Signal Processor for system integration.
- Wireless / APP Control compatible with PBX-DSP8.
- Auto Turn on with DC Offset
- High and Low level input
- Low Level user adjustable Outputs
- 8 Channels input / 8 channels output
- Amplifier remote turn on with user selectable delay
Processing Features:
- 32-Bit Digital Signal Processing
- 31 Band User Adjustable Equalization per channel
- User Adjustable Delay and Gain per channel
- User Adjustable Crossover Network with adjustable slopes 6 - 48db
- User Selectable Phase control per channel 0 / 180 degrees
- Adjustable input voltage per channel pairings 250mV - 9V
- 6.5" Pro Audio Compression Driver Co-Axial
- 1" Aluminum Compression Horn Tweeter
- Hybrid Carbon/DDC Treated Paper Cone
- Butyl Rubber Surround
- Compression Push Input Terminals
- 1.5" BASV Voice Coil
- 4-ohm Impedance
- 20oz. Y-35 Grade Motor Structure
- Vented Pole Piece
- Sold in Pairs
- Grill Included
- Ultra Thin Mount Design
- Parabolic Santoprene® Hybrid Surround
- 8" Dual 4-Ohm Subwoofer
- 250 watt RMS/ 500 Watts Max
- Polycarbonate Cone
- 1.5" Vented BASV Voice Coil Former
- Perimeter Aero-Vent Voice Coil Cooling Vents
- Proprietary Non Resonance Steel Basket
- Chrome Push Terminals
- Optimally Designed for Small Sealed Enclosures
- Compatible with PowerBass SWX Subwoofer Grills
