PBX1-10D2 10" Subwoofer
- Parabolic Santoprene® Hybrid Surround
- 10" Dual 2-Ohm Subwoofer
- 450 watt RMS/900 Watts Max
- Polycarbonate Cone and Inverted Dust Cap
- Vented BASV Voice Coil Former
- Perimeter Aero-Vent Voice Coil Cooling Vents
- Proprietary Non Resonance Steel Basket
- Chrome Push Terminals
- Optimally Designed for Both Sealed or Ported Enclosures
- Compatible with PowerBass SWX Subwoofer Grills
Read more
PBX1 SERIES PBX1-10D2 10" SUBWOOFER WITH EXTENDED LOW FREQUENCY RESPONSE
Our newly designed PBX-1 Series Subwoofers, feature a stunning new look and sound that has been optimized for extended low frequency response giving you even more bottom end sound and increasing the overall sonic accuracy of tight and refined transient bass response. The ultimate in sound quality meets output for the most accurate and responsive bass tones.
The PBX-1 Series combines a poly-carbonate cone along with a Parabolic Santoprene Hybrid rubber surround and multi-layer hybrid progressive spiders for accurate controlled bass response. This all housed in our newly designed stamped and textured non resonate steel basket keeping the subwoofer light and durable.
The PBX-1 Series also uses a combination of our perimeter and pole venting system to keep air circulating over the voice coil so everything stays cool during the most strenuous of tracks.
The PBX-1 Series Subwoofers are enclosure versatile and offer amazingly low bass whether installed in a sealed enclosure or ported enclosure and are available in Dual 2Ω or Dual 4Ω configurations and in sizes 8”, 10” & 12” Want to protect your PBX-1 Series Subwoofer we have you covered with our SWX Series Grills for quick and seamless subwoofer protection.
Experience best in class bass performance and tone with the new PBX-1 Series Subwoofers.
Specifications
- Subwoofer Frequency Range: 29 Hz - 350 Hz
- Inputs: Dual Coil
- Fs: 33.1 Hz
- Cutout Diameter: 9.5" (240.0mm)
- BL: 6.943
- Nominal Impedance: Dual 2-ohm
- Voice Coil Size: 2 in
- Material: Polycarbonate
- Magnet Size: 127 oz
- Sensitivity (1W / 1M): 81 dB
- Motor Structure: 127 oz
- Mounting Depth: 6 in
- Xmax: 14.9 mm
- Spl: 81 dB
- No: 0.084 %
- Qts: 0.982
- Qes: 1.164
- Qms: 6.279
- Mms: 189.970 g
- Cms: 0.122 MM/N
- Vas: 24.856 Ltr
- SD: 380.13 sqCM
- Test Impedance: 1.58-ohm
- VC Impedance: 2-ohm + 2-ohm
- Size: 10 in
- Sensitivity: 81 dB
- Frequency Response: 29 Hz - 350 Hz
- Voice Coil Size: 2 in
- Power Handling (RMS/Peak): 450 / 900 watts
PBX1-10D2 10" Subwoofer
Recommended Products
- Waterproof design IPX7
- Bluetooth 5.0 Chip provides 30Ft. of wireless range
- Dual 1500mAh Rechargeable Battery’s provide 10 hours of music playback
- TWS True Wireless Stereo
- SPLIT the BT-200 into 2 speakers for Modular Stereo Sound
- Dual Passive Radiators for enhanced Bass Response
- Rubber Bumper Cover for Rugged Protection.
- Dual USB-A to USB-C Charge Cable included
- Waterproof design IPX7
- Bluetooth 5.3 Chip provides 30Ft. of wireless range
- RGB Lighting with User Selectable Effects
- User Selectable Equalizer
- USB-A for use with Thumb Drive Music Storage
- USB-A for charging mobile devices
- Built in Microphone for handsfree calling
- 3600mAh Rechargeable Battery provides 7 hours of music playback
- TWS True Wireless Stereo – connect 2 BT-500 Tubes together for true wireless stereo sound
- Shoulder Strap for easy carry
- USB-C Charge Cable included
- 900 Watt High Efficiency Full-Range Class D Design
- Front Load Terminal Design
- 2-OHM Stable Six Channel Amplifier
- Ultra Low Current Draw
- Double Sided Copper Plated PCB
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- Variable Subsonic Filter
- High Current Voltage Ripple Rejection Circuitry
- Balanced RCA Inputs
- Selectable Auto Turn On Circuit
- Remote Soft Delay Turn On/Off Circuit
- 40 Click Variable Detente High/Low Pass Electronic Crossover
- LPF / HPF / x10 BandPass Filter Selector Switch
- Variable Gain Control
- Calibrated Visual Clip Indicator
- Wired Secondary Remote Gain Control Included
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Digital Signal Processor for system integration.
- Wireless / APP Control compatible with PBX-DSP8.
- Auto Turn on with DC Offset
- High and Low level input
- Low Level user adjustable Outputs
- 8 Channels input / 8 channels output
- Amplifier remote turn on with user selectable delay
Processing Features:
- 32-Bit Digital Signal Processing
- 31 Band User Adjustable Equalization per channel
- User Adjustable Delay and Gain per channel
- User Adjustable Crossover Network with adjustable slopes 6 - 48db
- User Selectable Phase control per channel 0 / 180 degrees
- Adjustable input voltage per channel pairings 250mV - 9V
- 6.5" Pro Audio Compression Driver Co-Axial
- 1" Aluminum Compression Horn Tweeter
- Hybrid Carbon/DDC Treated Paper Cone
- Butyl Rubber Surround
- Chrome Push Input Terminals
- 1.75" BASV Voice Coil
- 4-ohm Impedance
- 20oz. Y-35 Grade Motor Structure
- Vented Pole Piece
- Sold in Pairs
- Grill Included
- Marine Grade 8" 2-Way Pod Speakers
- Dual Thin Mount Hoop Rotatable Mounting Bracket
- RGB Illumination *Compatible with XL-RGB1
- Injection Molded UV-Treated Silver Polypropylene Cones
- Water Tight TPU Surround
- Grill Mounted 25mm SD Mylar Tweeter
- UV Inhibited Injection Molded Plastic Pod
- UV-treated Aluminum Mesh Grills
- Fits Bar Sizes 1.5", 1.875", & 2"
- 4-Ohm System Impedance
- Sold in Pairs w/Mounting Brackets and RGB Lighting
- Universal RGB Controller
- iOS and Android App Controlled
- IPX6 Rated
- Waterproof Sealed Design
- Infinite Color Choices
- 15 PreSet Effects
- Create your own Effects and Color Patterns
- Plug and Play with PowerBass XL RGB Speakers
