3XL-1010D 10" Subwoofer

  • 10" Dual 1-Ohm Subwoofer
  • 800 watt RMS/1600 Watts Max
  • DDC Pressed Paper Cone
  • High Roll Foam Surround
  • 3” Vented HD BASV Voice Coil Former
  • Perimeter Aero-Vent Voice Coil Cooling Vents
  • Non Resonance DDC Coated Cast Aluminum Basket
  • XTRA XTRA XTRA Large Double Stacked Motor Structure
  • Square Spring Loaded Nickel Plated Push Terminals
  • Designed for Sealed & Ported Enclosures 
3XL-1010D 10
Home > Products > Subwoofers > 3XL-1010D 10" Subwoofer
Read more


Making our best even better is what our engineers accomplished for the newly redesigned 3XL subwoofer series. Combining a new bold look with the innovation that the 3XL series is known for, PowerBass created our most accomplished High Output Subwoofer to date.

The 3XL series have been designed to withstand the extreme heat that the new generation Class “D” amplifiers create. Class “D” amplifiers heat up the woofers voice coil two to three times hotter and faster than a conventional class A/B amplifier. This calls for Xtreme measures and special parts to classify these as a true “Class D Subwoofer”. But hey, this is PowerBass. We have it under control.

First, we use industrial assembly glues that are made in the USA that handle this excessive heat that would normally tear a conventional subwoofer apart. Then there is perimeter venting to allow air movement over the voice coil built into our custom cut, cast aluminum basket. The basket works as a strong foundation for our heavy duty non-pressed raw pulp paper cone and redesigned inverted PBX dust cap.

The 3XL 10" Subwoofers all feature 3” HD BASV voice coil formers high temperature voice coil winding to help dissipate heat. To allow full movement of the cone, we utilize an ultra high roll foam surround that increases the cone area for higher output along with linear cone stability throughout the subwoofers peak excursion.

To make sure high voltages from the amplifier reach the subwoofers, we designed our new square spring loaded nickel plated push terminals and incorporated FEA optimized Xtra Xtra Xtra Large double stacked motor structure.

3XL Subwoofers are available in 8", 10", 12” and 15” sizes in either dual 1-OHM or dual 2-OHM versions to maximize your amplifiers power.


  • Subwoofer Frequency Range: 35 Hz - 450 Hz
  • Fs: 45.6
  • Depth: 8.5"
  • BL: 15.935
  • Nominal Impedance: Dual 1-ohm
  • Voice Coil Size: 3 in
  • Material: Pressed and Coated Pulp Paper
  • Magnet Size: 228.46oz
  • Sensitivity (1W / 1M): 83.08 dB
  • Mounting Depth: 8.5"
  • Xmax: 19mm
  • Spl: 83.08 dB
  • No: 0.122
  • Qts: 0.554
  • Qes: 0.617
  • Qms: 5.44
  • Mms: 281.741 g
  • Cms: 0.042 mm/N
  • Vas: 8.289
  • SD: 373.25 cm2
  • Test Impedance: 1.89-ohms
  • VC Impedance: 1-ohm + 1-ohm
  • Size: 10 in
  • Sensitivity: 83.08 dB
  • Frequency Response: 35 Hz - 450 Hz
  • Voice Coil Size: 3 in
  • Power Handling (RMS/Peak): 800 / 1600 watts


3XL-1010D 10" Subwoofer