POWERBASS
Mobile Audio
SHOW
SORT BY
FILTER
FILTER BY
- Single 10" 200 Watt RMS Amplified Under Seat Subwoofer Enclosure
- Extruded Aluminum Enclosure with Dynamic Damping
- 10” Injection Molded PP Cone Woofer
- 1.5" KSV Voice Coil Former
- 1-Channel 200 Watt High Efficiency Class D Design
- High Level (Speaker)/Low Level (RCA) Input
- Soft Delay Turn On/Off Circuit
- Auto Turn-on (high level input only)
- Variable Low Pass Electronic Crossover
- Variable 12dB Bass Boost EQ @ 45 Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Variable Wired Remote Gain Control Included
- Mounting Hardware Included
- 10.9"W x 3.2"H x 14.4"D
- Single 8" 150 Watt RMS Amplified Under Seat Subwoofer Enclosure
- Extruded Aluminum Enclosure with Dynamic Damping
- 8” Injection Molded PP Cone Woofer
- 1.5" KSV Voice Coil Former
- 1-Channel 150 Watt High Efficiency Class A/B Design
- High Level (Speaker)/Low Level (RCA) Input
- Soft Delay Turn On/Off Circuit
- Auto Turn-on (high level input only)
- Variable Low Pass Electronic Crossover
- Variable 12dB Bass Boost EQ @ 45 Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Variable Wired Remote Gain Control Included
- Mounting Hardware Included
- 9.75"W x 2.75"H x 13.5"D
- Digital Signal Processor for system integration.
- Wireless / APP Control compatible with PBX-DSP8.
- Auto Turn on with DC Offset
- High and Low level input
- Low Level user adjustable Outputs
- 8 Channels input / 8 channels output
- Amplifier remote turn on with user selectable delay
Processing Features:
- 32-Bit Digital Signal Processing
- 31 Band User Adjustable Equalization per channel
- User Adjustable Delay and Gain per channel
- User Adjustable Crossover Network with adjustable slopes 6 - 48db
- User Selectable Phase control per channel 0 / 180 degrees
- Adjustable input voltage per channel pairings 250mV - 9V
- 9-Band Active Equalizer
- Bi-Polar Mosfet PWM Power Supply
- Frequency Response: 20HZ-40KHz
- Variable Subwoofer Frequency Roll-off 30Hz-120Hz
- Front Panel Source Selector
- Independent Subwoofer Volume Control
- Front and Rear Output Fader
- 2 Low Level RCA Inputs: Rear Aux and Rear CD
- 3 Low Level RCA Outputs: Sub, Front and Rear
- EQ Centers: 50Hz, 120Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz & 16kHz
- 4-Band Active Equalizer
- Bi-Polar PWM Power Supply
- Frequency Response: 20Hz-40KHz
- Switchable main/aux input (front mounted 3.5mm jack or Rear RCA)
- Front/Rear/Sub Output
- Variable Master Volume Control
- Selectable 120/80Hz Subwoofer Crossover
- Variable Subwoofer Volume Control
- Front and Rear Output Fader
- 3 Inputs: Front Aux (3.5mm jack for MP3), Rear Aux and Rear CD (Low Level RCA)
- Digitally Restore Lost Low Frequency Information
- Wired Dash Mount Remote Control Knob
- 2Ch Pre Amp Input
- 2Ch Output
- User Adjustable Center Frequency
- User Adjustable Frequency Range
- User Selectable Output Voltage 2.5V - 10V RMS
- User Selectable Ground Isolation Referenced, Isolated, 200Ω Fixed
- User Selectable Balanced or Unbalanced Preamp Inputs
- Fixed Subsonic Filter 30Hz 12db / Octave
- 100A Output Circuit
- 400A Output Circuit linked to up to 4 units
- 120V Input Voltage
- Built in Cooling Fans
- LCD Voltage Meter Included
- Intelligent 3-Way Protection Circuit
- 100A Output Circuit
- 400A Output Circuit linked to up to 4 units
- 220V Input Voltage
- Built in Cooling Fans
- LCD Voltage Meter Included
- Intelligent 3-Way Protection Circuit
- 12" Single 4-Ohm Woofer
- 250 watt RMS/500 Watts Max
- DDC Treated Paper Cone
- 4-Layer Treated Foam Surround
- 2" BASV Voice Coil Former
- Stamped Steel Basket
- Optimized for Sealed or Ported Enclosures
- 10" Single 4-Ohm Woofer
- 225 watt RMS/450 Watts Max
- DDC Treated Paper Cone
- 4-Layer Treated Foam Surround
- 2" BASV Voice Coil Former
- Stamped Steel Basket
- Optimized for Sealed or Ported Enclosures
Heavy Duty OFC (Oxygen Free Copper) Wiring Kit
- 80 Amp Mini ANL Fuse & Holder W/Clear Acrylic Cover
- 17' Twisted Pair Triple Shield Braided RCA Cable
- 17' 4 Gauge Orange-Flex Power Wire
- 7' 4 Gauge Black-Flex Ground Wire
- 17' 12 Gauge Orange-Flex Speaker Wire
- 6' Black Flex Loom Tubing
- Gold Terminal Conectors
- Heavy Duty OFC (Oxygen Free Copper) Wiring Kit
- 60 Amp Mini ANL Fuse & Holder W/Clear Acrylic Cover
- 17' Twisted Pair Triple Shield Braided RCA Cable
- 17' 8 Gauge Orange-Flex Power Wire
- 7' 8 Gauge Black-Flex Ground Wire
- 17' Orange-Flex Speaker Wire
- 6' Black Flex Loom Tubing
- Gold Terminal Conectors
- Heavy Duty 4 Gauge 50% CCA/50% OFC (Copper Clad Aluminum/Oxygen Free Copper) Blend Amplifier Installation Kit
- 80 Amp AGU Fuse W/Clear Water Proof In-Line Fuse Holder
- 17' Twisted Pair Triple Shield Braided RCA Cable
- 17' 8 Gauge Blue-Flex Power Wire
- 7' 8 Gauge Black-Flex Ground Wire
- 20' Blue-Flex Speaker Wire
- 6' Black Flex Loom Tubing
- Gold Terminal Conectors
- Heavy Duty 8 Gauge 50% CCA/50% OFC (Copper Clad Aluminum/Oxygen Free Copper) Blend Amplifier Installation Kit
- 60 Amp AGU Fuse W/Clear Water Proof In-Line Fuse Holder
- 17' Twisted Pair Triple Shield Braided RCA Cable
- 17' 8 Gauge Blue-Flex Power Wire
- 7' 8 Gauge Black-Flex Ground Wire
- 20' Blue-Flex Speaker Wire
- 6' Black Flex Loom Tubing
- Gold Terminal Conectors
- 50’ 0 Gauge Power Wire
- 100% OFC Wire
- 2842 Strands
- Flexible Orange Satin PVC Insulation Jacket
- 50’ 0 Gauge Ground Wire
- 100% OFC Wire
- 2842 Strands
- Flexible Black Satin PVC Insulation Jacket
- 100’ 4 Gauge Power Wire
- 100% OFC Wire
- 1029 Strands
- Flexible Black Satin PVC Insulation Jacket
- 100’ 4 Gauge Ground Wire
- 100% OFC Wire
- 1029 Strands
- Flexible Black Satin PVC Insulation Jacket
- 100’ 4 Gauge Ground Wire
- 882 Strands
- 50% OFC/50% CCA Blended Wire
- Flexible Brown Satin PVC Insulation Jacket
- 100’ 4 Gauge Ground Wire
- 882 Strands
- 50% OFC/50% CCA Blended Wire
- Flexible Black Satin PVC Insulation Jacket
- 230’ 8 Gauge Power Wire
- 100% OFC Wire
- 392 Strands
- Flexible Black Satin PVC Insulation Jacket
- 230’ 8 Gauge Ground Wire
- 100% OFC Wire
- 392 Strands
- Flexible Black Satin PVC Insulation Jacket
- 230’ 8 Gauge Power Wire
- 336 Strands
- 50% OFC/50% CCA Blended Wire
- Flexible Brown Satin PVC Insulation Jacket
- 230’ 8 Gauge Ground Wire
- 336 Strands
- 50% OFC/50% CCA Blended Wire
- Flexible Brown Satin PVC Insulation Jacket
- 330’ 12 Gauge Speaker Wire
- 100% OFC Wire
- 132 Strands x 2
- Flexible Orange and Black Satin PVC Insulation Jacket
- 330’ 12 Gauge Speaker Wire
- 135 Strands x 2
- 50% OFC/50% CCA Blended Wire
- Flexible Blue Satin PVC Insulation Jacket
- 500’ 16 Gauge Speaker Wire
- 100% OFC Wire
- 270 Strands x 2
- Flexible Orange and Black Satin PVC Insulation Jacket
- 500’ 16 Gauge Speaker Wire
- 60 Strands x 2
- 50% OFC/50% CCA Blended Wire
- Flexible Blue Satin PVC Insulation Jacket
- 6 Channel RCA cable for use with multiple amplifiers
- Premium OFC (Oxygen Free Copper) Interconnect RCA’s
- Twisted Pair and Double Shielded for Maximum Noise Rejection
- Custom Molded Connectors
- Perfect fitment for Standard or Tiffany type connections
*updated images coming soon
- 4 Channel RCA cable for use with 4 channel amplifiers
- Premium OFC (Oxygen Free Copper) Interconnect RCA’s
- Twisted Pair and Double Shielded for Maximum Noise Rejection
- Custom Molded Connectors
- Perfect fitment for Standard or Tiffany type connections
*updated images coming soon