S-1S 1" Silk Dome Tweeters
- 1" Silk Dome Tweeter Diaphragm
- Neodymium Magnet
- Ferrofluid® Cooling
- Computer Aided In-line 12 dB Crossover
- Flush/Angle/Surface Mounts Included
- 4-Ohm System Impedance
Home > Products > Component systems >
S-1S 1" Silk Dome Tweeters
Read more
S-1S 1" Silk Dome Tweeter
Listening to balanced and smooth highs makes the music come alive. The S-1S Silk Dome Tweeters deliver accurate and smooth sound reproduction without any listening fatigue.
These tweeters come with 3 different ways to mount them to make your tweeter install fast and easy. With an inline 12dB crossover, you do not need to worry if you are getting the proper signal input to your tweeters.
Sit back and listen with the confidence that only PowerBass tweeters can bring you.
Specifications
- Nominal Impedance: 4-ohm
- Material: silk
- Sensitivity (1W / 1M): 91 dB
- Mounting Depth: 0.75 in
- Size: 1 in
- Sensitivity: 91 dB
- Frequency Response: 3 kHz - 20 kHz
- Power Handling (RMS/Peak): 50 / 100 watts
Downloads
S-1S 1" Silk Dome Tweeters
Recommended Products
- Waterproof design IPX7
- Bluetooth 5.0 Chip provides 30Ft. of wireless range
- Dual 1500mAh Rechargeable Battery’s provide 10 hours of music playback
- TWS True Wireless Stereo
- SPLIT the BT-200 into 2 speakers for Modular Stereo Sound
- Dual Passive Radiators for enhanced Bass Response
- Rubber Bumper Cover for Rugged Protection.
- Dual USB-A to USB-C Charge Cable included
- Waterproof design IPX7
- Bluetooth 5.3 Chip provides 30Ft. of wireless range
- RGB Lighting with User Selectable Effects
- User Selectable Equalizer
- USB-A for use with Thumb Drive Music Storage
- USB-A for charging mobile devices
- Built in Microphone for handsfree calling
- 3600mAh Rechargeable Battery provides 7 hours of music playback
- TWS True Wireless Stereo – connect 2 BT-500 Tubes together for true wireless stereo sound
- Shoulder Strap for easy carry
- USB-C Charge Cable included
-
APPLICATIONS
- MODEL 3 (2018 - 2024)
- MODEL Y (2020 - 2025)
- CYBER TRUCK
- MODEL 3 HIGHLAND
- MODEL Y JUNIPER
To check your fitment with our OE Series Direct Fit and Special Application Speaker please click the button below to view our OE SERIES FITMENT GUIDE. Please note Speakers may fit in other make / model applications other than those listed above, be sure to have a certified installer verify which size you have in your vehicle before purchase.
FITMENT GUIDE
-
APPLICATIONS
- MODEL 3 (2018 - 2024)
- MODEL Y (2020 - 2025)
- CYBER TRUCK
- MODEL 3 HIGHLAND
- MODEL Y JUNIPER
To check your fitment with our OE Series Direct Fit and Special Application Speaker please click the button below to view our OE SERIES FITMENT GUIDE. Please note Speakers may fit in other make / model applications other than those listed above, be sure to have a certified installer verify which size you have in your vehicle before purchase.
FITMENT GUIDE
- 900 Watt High Efficiency Full-Range Class D Design
- Front Load Terminal Design
- 2-OHM Stable Six Channel Amplifier
- Ultra Low Current Draw
- Double Sided Copper Plated PCB
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- Variable Subsonic Filter
- High Current Voltage Ripple Rejection Circuitry
- Balanced RCA Inputs
- Selectable Auto Turn On Circuit
- Remote Soft Delay Turn On/Off Circuit
- 40 Click Variable Detente High/Low Pass Electronic Crossover
- LPF / HPF / x10 BandPass Filter Selector Switch
- Variable Gain Control
- Calibrated Visual Clip Indicator
- Wired Secondary Remote Gain Control Included
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Digital Signal Processor for system integration.
- Wireless / APP Control compatible with PBX-DSP8.
- Auto Turn on with DC Offset
- High and Low level input
- Low Level user adjustable Outputs
- 8 Channels input / 8 channels output
- Amplifier remote turn on with user selectable delay
Processing Features:
- 32-Bit Digital Signal Processing
- 31 Band User Adjustable Equalization per channel
- User Adjustable Delay and Gain per channel
- User Adjustable Crossover Network with adjustable slopes 6 - 48db
- User Selectable Phase control per channel 0 / 180 degrees
- Adjustable input voltage per channel pairings 250mV - 9V
- 6.5" Pro Audio Compression Driver Co-Axial
- 1" Aluminum Compression Horn Tweeter
- Hybrid Carbon/DDC Treated Paper Cone
- Butyl Rubber Surround
- Compression Push Input Terminals
- 1.5" BASV Voice Coil
- 4-ohm Impedance
- 20oz. Y-35 Grade Motor Structure
- Vented Pole Piece
- Sold in Pairs
- Grill Included
