Mobile Audio

• Premium OFC (Oxygen Free Copper) Interconnect RCA’s
• Twisted Pair and Double Shielded for Maximum Noise Rejection 
• Custom Molded Connectors 
• Perfect fitment for Standard or Tiffany type connections

• 6 x 9" Upgraded OEM Replacement Component System
• 80 Watts RMS/160 Watts Max
• Injection Molded PP Cone
• 20 oz. Magnet
• Nylon OEM Speaker Adapter
• 1” Inverted Titanium Dome Tweeter
• Inline Crossovers 
• Factory Plug and Play Wiring Adapters
• 4-ohm System Impedance

APPLICATIONS
Some vehicles are not equipped with OEM component system please use the OE-692-TY for these applications
• 09-13 Lexus CT Front Location
• 03-14 Lexus GX Front Location
• 07-14 Lexus LS Front Location
• 04-14 Lexus RX Front Location
• 10-14 Toyota 4 Runner Front Location
• 03-09 Toyota 4 Runner Front Location
• 05-14 Toyota Avalon Front Location
• 02-11 Toyota Camry Front Location
• 07-14 Toyota FJ Cruiser Front Location
• 08-10 Toyota Highlander Front Location
• 08-14 Toyota Land Cruiser Front Location
• 10-14 Toyota Prius Front Location
• 08-14 Toyota Sequoia Front Location
• 04-09 Toyota Solara Front Location
• 05-14 Toyota Tacoma Front Location
• 07-14 Toyota Tundra Front Location
• 09-14 Toyota Venza Front Location
Speakers may fit in newer make applications other than those listed above

• 60 Watts RMS/120 Watts Max
• Injection Molded PP Cone
• 10 oz. Magnet
• Nylon OEM Speaker Adapter
• 1” Inverted Titanium Dome Tweeter
• Inline Crossovers 
• Factory Plug and Play Wiring Adapters 
• 4-ohm System Impedance

APPLICATIONS
Some vehicles are not equipped with OEM component system please use the OE-652-TY for these applications
• 09-13 Lexus CT Rear Location
• 02-06 Lexus ES Front & Rear Locations
• 06-11 Lexus GS Front Location
• 03-12 Lexus GX Rear Location
• 01-12 Lexus IS Front Location
• 06-12 Lexus IS Rear Location
• 99-03 Lexus RX Front & Rear Locations
• 03-09 Pontiac Vibe Rear Location
• 05-12 Scion TC Front & Rear Locations
• 04-07 Scion XA Front & Rear Locations
• 04-12 Scion XB Front Location
• 08-12 Scion XB Rear Location
• 08-11 Scion XD Front & Rear Locations
• 05-11 Toyota Avalon Rear Location
• 00-05 Toyota Celica Front & Rear Locations
• 01-12 Toyota Corolla Front Location
• 00-05 Toyota Echo Front Location
• 08-12 Toyota Highlander Rear Location
• 02-11 Toyota Matrix Front & Rear Location
• 01-11 Toyota Prius Front & Rear Location
• 01-11 Toyota RAV4 Front & Rear Locations
• 08-12 Toyota Sequoia Front & Rear Locations
• 98-12 Toyota Sienna Front & Rear Locations
• 98-03 Toyota Solara Front Location
• 05-13 Toyota Tacoma Rear Location
• 00-13 Toyota Tundra Rear Location
• 03-06 Toyota Tundra Front Location
• 09-11 Toyota Venza Rear Location
• 07-12 Toyota Yaris Front Location
• 07-12 Toyota Yaris Lift Back Rear Location
Speakers may fit in newer make applications other than those listed above

• 6.5" Upgraded OEM Replacement Co-Axial Speakers
• 60 Watts RMS/120 Watts Max
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 1” Silk Dome Tweeter
• 10 oz. Magnet
• Factory Plug and Play Wiring Adapters 
• 4-ohm System Impedance

APPLICATIONS
Some vehicles are equipped with OEM component system please use the OE-65C-TY for these applications
• 09-13 Lexus CT Rear Location
• 02-06 Lexus ES Front & Rear Locations
• 06-11 Lexus GS Front Location
• 03-12 Lexus GX Rear Location
• 01-12 Lexus IS Front Location
• 06-12 Lexus IS Rear Location
• 99-03 Lexus RX Front & Rear Locations
• 03-09 Pontiac Vibe Rear Location
• 05-12 Scion TC Front & Rear Locations
• 04-07 Scion XA Front & Rear Locations
• 04-12 Scion XB Front Location
• 08-12 Scion XB Rear Location
• 08-11 Scion XD Front & Rear Locations
• 05-11 Toyota Avalon Rear Location
• 00-05 Toyota Celica Front & Rear Locations
• 01-12 Toyota Corolla Front Location
• 00-05 Toyota Echo Front Location
• 08-12 Toyota Highlander Rear Location
• 02-11 Toyota Matrix Front & Rear Location
• 01-11 Toyota Prius Front & Rear Location
• 01-11 Toyota RAV4 Front & Rear Locations
• 08-12 Toyota Sequoia Front & Rear Locations
• 98-12 Toyota Sienna Front & Rear Locations
• 98-03 Toyota Solara Front Location
• 05-13 Toyota Tacoma Rear Location
• 00-13 Toyota Tundra Rear Location
• 03-06 Toyota Tundra Front Location
• 09-11 Toyota Venza Rear Location
• 07-12 Toyota Yaris Front Location
• 07-12 Toyota Yaris Lift Back Rear Location
Speakers may fit in newer make applications other than those listed above

• 6 x 9" Upgraded OEM Replacement Co-Axial Speakers
• 80 Watts RMS/160 Watts Max
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 1” Silk Dome Tweeter
• 20 oz. Magnet
• Factory Plug and Play Wiring Adapters 
• 4-ohm System Impedance

APPLICATIONS
Some vehicles are equipped with OEM component system please use the OE-69C-TY for these applications
• 09-13 Lexus CT Front Location
• 03-14 Lexus GX Front Location
• 07-14 Lexus LS Front Location
• 04-14 Lexus RX Front Location
• 10-14 Toyota 4 Runner Front Location
• 03-09 Toyota 4 Runner Front Location
• 05-14 Toyota Avalon Front Location
• 02-11 Toyota Camry Front Location
• 07-14 Toyota FJ Cruiser Front Location
• 08-10 Toyota Highlander Front Location
• 08-14 Toyota Land Cruiser Front Location
• 10-14 Toyota Prius Front Location
• 08-14 Toyota Sequoia Front Location
• 04-09 Toyota Solara Front Location
• 05-14 Toyota Tacoma Front Location
• 07-14 Toyota Tundra Front Location
• 09-14 Toyota Venza Front Location
Speakers may fit in newer make applications other than those listed above

• Wired Remote Controler
• Controls all Functions on all XL Series Soundbars
• Power, Source Input, Bluetooth On/Off, Track Up/Down & Volume Up/Down
• Water Resistant Cables and Conectors
• Flush Mounted
• Plug and play
• Detente buttons for easy use with gloves

• Adjustable Aluminum Soundbar C-Clamps
• For use with XL Series Soundbars
• Fits 1.5" - 2.75" waketowers and roll bars
• Non-corrosive black powder coated aluminum  
• Stainless steel hardware included

• 990 Watt 5 Channel High Efficiency Full-Range Class D Design
• 2-OHM Stable Stereo Amplifier
• International Rectifier® Chip Set
• Ultra Low Current Draw
• Double Sided Copper Plated PCB
• Conformal Coated PC Board
• PWM MOSFET Power Supply
• Digital Sound Optimization Circuitry
• High Damping Control Circuit
• High Current Voltage Ripple Rejection Circuitry
• 3.5mm AUX Input
• Remote Soft Delay Turn On/Off Circuit 
• Variable Low/High Pass Electronic Crossover
• Variable 18dB Bass Boost EQ
• Variable Gain Control
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.

• 100’ 4 Gauge Ground Wire
• 882 Strands
• 50% OFC/50% CCA Blended Wire
• Flexible Black Satin PVC Insulation Jacket

• 230’ 8 Gauge Ground Wire
• 336 Strands
• 50% OFC/50% CCA Blended Wire
• Flexible Brown Satin PVC Insulation Jacket

• 500’ 16 Gauge Speaker Wire
• 60 Strands x 2
• 50% OFC/50% CCA Blended Wire
• Flexible Blue Satin PVC Insulation Jacket

• 330’ 12 Gauge Speaker Wire
• 135 Strands x 2
• 50% OFC/50% CCA Blended Wire
• Flexible Blue Satin PVC Insulation Jacket

• 15" Dual 1-Ohm Xtreme Super Woofer
• 3,500 Watts RMS/7,0000 Watts Max
• Non-pressed Raw Paper Pulp DDC Coated Cone
• 4” HD BASV Flat Wound Voice Coil/Former
• U-Turn High Roll Treated Foam Surround
• Sextuplet 10" Progressive Roll Conex Surrounds
• Dual Nickel 5-way 4 gauge Pro-lock Input Terminals
• Massive Quad 160 oz Stacked MAgnets (40lbs/640 oz total)
• Hyper Extended One-Piece Vented Back Plate
• Heavy Duty Competition CNC Cut Cast Aluminum Frame
• Designed for Larger Ported Enclosures

• Single 8" 150 Watt RMS Amplified Under Seat Subwoofer Enclosure
• Extruded Aluminum  Enclosure with Dynamic Damping
• 8” Injection Molded PP Cone Woofer
• 1.5" KSV Voice Coil Former
• 1-Channel 150 Watt High Efficiency Class A/B Design
• High Level (Speaker)/Low Level (RCA) Input
• Soft Delay Turn On/Off Circuit
• Auto Turn-on (high level input only)
• Variable Low Pass Electronic Crossover
• Variable 12dB Bass Boost EQ @ 45 Hz
• Variable Gain Control
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
• Variable Wired Remote Gain Control Included
• Mounting Hardware Included
• 9.75"W x 2.75"H x 13.5"D

• Converts Speaker Level to Low Level RCA for our XMA and XL Amplifiers
• Easy Installation w/Pro-lock inputs

• 6x9" Thin Mount Co-Axial Speaker System
• OEM Drop in Replacement Design
• Grey Injection Molded PP/Carbon Fiber Cone 
• Butyl Rubber Surround 
• 10 oz. Motor Structure
• Shallow Mounting Depth 
• EFF Motor Structures (Efficient Flux Field) 
• Rigid Tooled Basket With Flat Black Finish 
• 0.75" Aluminum Dome Tweeter
• SEL Tweeter Ring (Sound Expander Lens)
• 2-ohm System Impedance 

• 7" Woofer/Speaker System
• OEM Drop in Replacement Design
• Grey Injection Molded PP/Carbon Fiber Cone 
• Butyl Rubber Surround 
• 16 oz. Motor Structure
• Shallow Mounting Depth 
• EFF Motor Structures (Efficient Flux Field) 
• Rigid Tooled Basket With Flat Black Finish 
• 2-ohm System Impedance 

• Heavy Duty OFC (Oxygen Free Copper) Wiring Kit
• 60 Amp Mini ANL Fuse & Holder W/Clear Acrylic Cover
• 17' Twisted Pair Triple Shield Braided RCA Cable
• 17' 8 Gauge Orange-Flex Power Wire
• 7' 8 Gauge Black-Flex Ground Wire
• 17' Orange-Flex Speaker Wire
• 6' Black Flex Loom Tubing
• Gold Terminal Conectors

Heavy Duty OFC (Oxygen Free Copper) Wiring Kit

• 80 Amp Mini ANL Fuse & Holder W/Clear Acrylic Cover
• 17' Twisted Pair Triple Shield Braided RCA Cable
• 17' 4 Gauge Orange-Flex Power Wire
• 7' 4 Gauge Black-Flex Ground Wire
• 17' 16 Gauge Orange-Flex Speaker Wire
• 6' Black Flex Loom Tubing
• Gold Terminal Conectors

• 12" Single 4-Ohm Woofer
• 250 watt RMS/500 Watts Max
• DDC Treated Paper Cone
• 4-Layer Treated Foam Surround 
• 2" BASV Voice Coil Former
• Stamped Steel Basket
• Optimized for Sealed or Ported Enclosures