XL-1040 10" Subwoofer
- New PBX Dust Cap
- 10" 4-Ohm Subwoofer
- 350 watt RMS/700 Watts Max
- Proprietary Non-pressed Paper DDC Coated Cone
- High Roll Santoprene® Surround
- 2.0" Vented BASV Voice Coil Former
- Perimeter Aero-Vent Voice Coil Cooling Vents
- Proprietary Non Resonance Polycarbonate/Glass Fiber Basket
- Chrome Push Terminals
- Optimally Designed for Both Small Sealed or Ported Enclosures
Home > Products >
XL-1040 10" Subwoofer
Read more
XL-1040 10" SUBWOOFER WITH XTRA LARGE BASS
Updated with our new PBX imprinted dustcap and sand blasted back plate finish, our XL subwoofers are designed to be bulletproof-reliable with all of the features of the rest of the Xtreme range, but in a more affordable package.
Boasting a custom turbine style frame constructed of polycarbonate/glass fiber, this unique basket supports dual stack magnets and a extended dome backplate.
We utilize a combination of perimeter and pole venting to keep air circulating over the voice coil so everything stays cool.
A non-pressed paper cone was selected for its natural smooth bass reproduction and its ability to provide high output with low distortion even under the stress of high SPL. Finally, to make sure the power gets to the subwoofer, we used chrome push terminals for maximum current transfer.
The XL subwoofers are Xtremely versatile and offer amazingly low bass whether installed in a small sealed enclosure or ported enclosure and are available in 8”, 10” & 12”
Specifications
- Subwoofer Frequency Range: 35 Hz - 500 Hz
- Inputs: Single Coil
- Fs: 38.2 Hz
- Cutout Diameter: 9 5/16" (237mm)
- BL: 14.904
- Nominal Impedance: Dual 4-ohm
- Voice Coil Size: 2 in
- Material: Non Pressed Paper
- Magnet Size: 164 oz
- Sensitivity (1W / 1M): 85 dB
- Motor Structure: 164 oz
- Mounting Depth: 5.23 in
- Xmax: 8.5 mm
- Spl: 84.2 dB
- No: 0.163%
- Qts: 0.572
- Qes: 0.655
- Qms: 3.7
- Mms: 142.9 g
- Cms: 106.014 uM/N
- Vas: 19.842 Ltr
- SD: 363.05 sqCM
- Test Impedance: 3.7-ohm
- VC Impedance: 4-ohm
- Size: 10 in
- Sensitivity: 85 dB
- Frequency Response: 35 Hz - 500 Hz
- Voice Coil Size: 2 in
- Power Handling (RMS/Peak): 350 / 700 watts
Downloads
XL-1040 10" Subwoofer
Recommended Products
- Waterproof design IPX7
- Bluetooth 5.0 Chip provides 30Ft. of wireless range
- Dual 1500mAh Rechargeable Battery’s provide 10 hours of music playback
- TWS True Wireless Stereo
- SPLIT the BT-200 into 2 speakers for Modular Stereo Sound
- Dual Passive Radiators for enhanced Bass Response
- Rubber Bumper Cover for Rugged Protection.
- Dual USB-A to USB-C Charge Cable included
- Waterproof design IPX7
- Bluetooth 5.3 Chip provides 30Ft. of wireless range
- RGB Lighting with User Selectable Effects
- User Selectable Equalizer
- USB-A for use with Thumb Drive Music Storage
- USB-A for charging mobile devices
- Built in Microphone for handsfree calling
- 3600mAh Rechargeable Battery provides 7 hours of music playback
- TWS True Wireless Stereo – connect 2 BT-500 Tubes together for true wireless stereo sound
- Shoulder Strap for easy carry
- USB-C Charge Cable included
- 900 Watt High Efficiency Full-Range Class D Design
- Front Load Terminal Design
- 2-OHM Stable Six Channel Amplifier
- Ultra Low Current Draw
- Double Sided Copper Plated PCB
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- Variable Subsonic Filter
- High Current Voltage Ripple Rejection Circuitry
- Balanced RCA Inputs
- Selectable Auto Turn On Circuit
- Remote Soft Delay Turn On/Off Circuit
- 40 Click Variable Detente High/Low Pass Electronic Crossover
- LPF / HPF / x10 BandPass Filter Selector Switch
- Variable Gain Control
- Calibrated Visual Clip Indicator
- Wired Secondary Remote Gain Control Included
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Digital Signal Processor for system integration.
- Wireless / APP Control compatible with PBX-DSP8.
- Auto Turn on with DC Offset
- High and Low level input
- Low Level user adjustable Outputs
- 8 Channels input / 8 channels output
- Amplifier remote turn on with user selectable delay
Processing Features:
- 32-Bit Digital Signal Processing
- 31 Band User Adjustable Equalization per channel
- User Adjustable Delay and Gain per channel
- User Adjustable Crossover Network with adjustable slopes 6 - 48db
- User Selectable Phase control per channel 0 / 180 degrees
- Adjustable input voltage per channel pairings 250mV - 9V
- Marine Grade 8" 2-Way Pod Speakers
- Dual Thin Mount Hoop Rotatable Mounting Bracket
- RGB Illumination *Compatible with XL-RGB1
- Injection Molded UV-Treated Silver Polypropylene Cones
- Water Tight TPU Surround
- Grill Mounted 25mm SD Mylar Tweeter
- UV Inhibited Injection Molded Plastic Pod
- UV-treated Aluminum Mesh Grills
- Fits Bar Sizes 1.5", 1.875", & 2"
- 4-Ohm System Impedance
- Sold in Pairs w/Mounting Brackets and RGB Lighting
- Universal RGB Controller
- iOS and Android App Controlled
- IPX6 Rated
- Waterproof Sealed Design
- Infinite Color Choices
- 15 PreSet Effects
- Create your own Effects and Color Patterns
- Plug and Play with PowerBass XL RGB Speakers
