STA-10 10" Amplified Bass Enclosure

  • Single 10" 150 Watt RMS Amplified Under Seat Subwoofer Enclosure
  • Extruded Aluminum  Enclosure with Dynamic Damping
  • 10” Injection Molded PP Cone Woofer
  • 1.5" KSV Voice Coil Former
  • 1-Channel 150 Watt High Efficiency Class A/B Design
  • High Level (Speaker)/Low Level (RCA) Input
  • Soft Delay Turn On/Off Circuit
  • Auto Turn-on (high level input only)
  • Variable Low Pass Electronic Crossover
  • Variable 12dB Bass Boost EQ @ 45 Hz
  • Variable Gain Control
  • Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
  • Variable Wired Remote Gain Control Included
  • Mounting Hardware Included
  • 10.9"W x 3.2"H x 14.4"D
STA-10 10
Home > Products > Loaded sub enclosures > STA-10 10" Amplified Bass Enclosure
Read more


This vented enclosure contains an Ultra Efficient Class D mono amplifier perfectly matched to power the 10-inch woofer. We came up with a compact trapezoid shaped enclosure, perfectly tuned to get the most out of the proprietary 10-inch subwoofer. The geometric design maximizes transient response, reducing the negative effects that a small enclosure can have on the subwoofer by dispersing and dissipating standing waves away from the subwoofer. The result is cleaner, deeper bass.

Supplied with “plug in” connectors for speaker and power installation is simple and straightforward. Also since no holes need to be cut the STA-10 is a perfect choice for leased vehicles that could use a little extra bass.

STA Amplified Sub Enclosure

Aluminum Enclosure with a lighted logo badge all CAD (Computer Aided Design) for maximum output in small spaces

10-inch Polypropylene Woofer with 40 oz ferrite magnet and pole venting

200 watts RMS Mono Amplifier (400 watts Peak Music Power) featuring variable Gain, Low Pass and Bass EQ

High / Low Input Compatible with OEM or aftermarket radios

Variable Remote Gain Control (Included)


  • Selectable Subwoofer EQ: 0dB - 12 dB @ 45 Hz
  • Inputs: Low Level (RCA)/High Level (speaker level)
  • Equalization Boost/Cut: 0dB - 12 dB
  • Subwoofer Frequency Range: 20 Hz - 200 Hz
  • Power Supply: Unregulated PWM
  • Height: 3.2"
  • Width: 10.9"
  • Depth: 14.4"
  • Material: Extruded Aluminum
  • 2-ohm Power: 200 watts RMS / 400 watts max
  • Subwoofer EQ Frequency: 45 Hz
  • Variable Subwoofer EQ: 0dB - 12 dB
  • Low-Pass Crossover Freq: 40 Hz - 200 Hz
  • Dimensions (in Inches): 3.2" x 14.4" x 10.9"
  • Input Sensitivity: 250 mV - 6V (low level)/1.0V - 10 V
  • S/N Ratio: >85 dB
  • Total Harmonic Distortion: 0.5% at Rated Power
  • Output Power (14.4 V) @ 2 ohm: 200 watts RMS / 400 watts max
  • Channels (mono): 1
  • Frequency Response: 20 Hz - 200 Hz


STA-10 10" Amplified Bass Enclosure