M-1004D 10" Subwoofer
- 10" Dual 4-Ohm Subwoofer
- 325 watt RMS/650 Watts Max
- Proprietary DDC Coated Non-Pressed Paper Cone
- Large Roll Santoprene® Surround
- 2" Vented BASV Voice Coil Former
- Perimeter Aero-Vent Voice Coil Cooling Vents
- Non Resonance DDC Coated Stamped Steel Basket
- Rubber Mounting Gasket/Trim Ring
- Chrome Push Terminals
- Optimally Designed for Both Small Sealed or Ported Enclosures


M-1004D 10" SUBWOOFER
The Mighty M Series Subwoofer is what most call the standard to real old school car audio subwoofers with its non pressed paper cone and big motor structure as well as it large bass sound the M is the best all around subwoofer for every type of enclosure.
Check out these other features: 4-layer non pressed paper DDC (Dynamic Damping Coating) finished cone, Large Roll Santoprene® surrounds which allow free movement of the cone for maximum SPL, a large motor structure for high-power handling, 2” and 2.5” vented BASV Voice Coil formers for optimum performance, and cooling for maximum heat dissipation.
For increased operating efficiency, a CNC machined one piece backplate and pole plate are used to reduce gause (magnetic) losses and maximize air flow keeping the voice coil running cooler.
Chrome-plated binding post terminals accept large gauge wire to insure all power from the amplifier reaches the subwoofer.
Specifications
- Subwoofer Frequency Range: 35 Hz - 500 Hz
- Inputs: Dual Coil
- Fs: 35 Hz
- Cutout Diameter: 9 1/8" (230.1mm)
- BL: 9,358
- Nominal Impedance: Dual 4-ohm
- Voice Coil Size: 2 in
- Material: Non Pressed Paper
- Sensitivity (1W / 1M): 91 dB
- Motor Structure: 164 oz
- Mounting Depth: 5.125 in
- Xmax: 9.2 mm
- Spl: 91 dB
- No: 0.26%
- Qts: 0.423
- Qes: 0.47
- Qms: 4.2
- Mms: 110.06 g
- Cms: 187.7 uM/N
- Vas: 29.03 Ltr
- SD: 330.06 sqCM
- Test Impedance: 1.6-ohms
- VC Impedance: 4-ohm + 4-ohm
- Size: 10 in
- Sensitivity: 91 dB
- Frequency Response: 35 Hz - 500 Hz
- Voice Coil Size: 2 in
- Power Handling (RMS/Peak): 325 / 650 watts
Downloads
M-1004D 10" Subwoofer

Recommended Products
- Waterproof design IPX7
- Bluetooth 5.0 Chip provides 30Ft. of wireless range
- Dual 1500mAh Rechargeable Battery’s provide 10 hours of music playback
- TWS True Wireless Stereo
- SPLIT the BT-200 into 2 speakers for Modular Stereo Sound
- Dual Passive Radiators for enhanced Bass Response
- Rubber Bumper Cover for Rugged Protection.
- Dual USB-A to USB-C Charge Cable included
- Works with BT-200 SPLIT
- Black Powder-coated finish
- Heavy Duty Laser Cut Steel
- Available in these bar sizes:
- 7/8"
- 1"
- 1 3/8"
- 1 1/2"
- 6 Speaker 250 watt Amplified Bluetooth Powersports Soundbar
- IPX6 Rated
- 2 x 3.5" Square Poly Cone Woofers
- 2 x 3” Full Range Marine Grade Poly Cone Speakers
- 2 x 1” SD Mylar Tweeters
- Heavy Duty Extruded Aluminum Water Tight Housing
- LED back-lit Control Panel
- LED Visual Notifications
- Audible Power On/Off Notifications
- Built In DSP Processor
- Bluetooth and Wired RCA Inputs
- 2 Volt RCA Line Output
- Auto Turn On/Off Circuit
- Waterproof Wire Loom Connectors
- Universal L-Bracket or Stud Bolt-In Mounting System Included
- Universal Top or Bottom Mount Clamp Style Brackets (Sold Separately XL-SBCLAMP2, XL-SBTCLAMP, XL-SBSCLAMP)
- Optional Wireless Remote Control (Sold Separately XL-SBCONRF coming soon)
- Universal RGB Controller
- iOS and Android App Controlled
- IPX6 Rated
- Waterproof Sealed Design
- Infinite Color Choices
- 15 PreSet Effects
- Create your own Effects and Color Patterns
- Plug and Play with PowerBass XL RGB Speakers
- Soundbar / POD Square Clamps
- Perfect for Golf Cart Applications
- For use with the XL Soundbars
- Fits 0.75", 1.0", 1.25" square bars
- Non-corrosive black powder coating
- hardware included
- Soundbar / POD Thin Mount Clamps
- Perfect for Under Roof Mount Applications
- For use with the XL Soundbars
- Fits 1.5", 1.75", 2" round bars
- Non-corrosive black powder coating
- hardware included
