L-1004D 10" Subwoofer
- 10" Dual 4-Ohm Subwoofer
- 350 watt RMS/700 Watts Max
- Injection Molded PP Cone
- Large Roll NBR (Nitrile) Rubber Surround
- 2.0" Vented BKSV Voice Coil Former
- Perimeter Aero-Vent Voice Coil Cooling Vents
- Non Resonance DDC Coated Stamped Steel Basket
- Rubber Mounting Gasket/Trim Ring
- Chrome Push Terminals
- Optimally Designed for Both Small Sealed or Ported Enclosures
Read more
L-1004D 10" SUBWOOFER
Our new L Series Subwoofers have been engineered to deliver the earth-shaking bass but with a clean and smooth tone.
Each L model features a redesigned Injection Molded PP Cone. This cone combines deep bass and distortion free sound. Next we designed a single piece CNC machined back plate with extended pole piece to insure a strong symmetric gause (magnetic) field for increased operating efficiency. A sandblast finish was applied for good looks and durability.
To make the bass super tight, our engineers designed Large Roll NBR (Nitrile) Rubber surrounds which allows free movement of the cone for maximum SPL, a large motor structure for high power handling, 2.0” & 2.5" black Kapton voice coil former for optimum performance and cooling for maximum heat dissipation.
Specifications
- Fs: 33 Hz
- Cutout Diameter: 9 1/8 in (230.1mm)
- BL: 9.1
- Nominal Impedance: Dual 4-ohm
- Voice Coil Size: 2 in
- Material: Injection molded Polypropylene
- Sensitivity (1W / 1M): 91 dB
- Motor Structure: 164 oz
- Mounting Depth: 5.1 in
- Xmax: 11 mm
- Spl: 91 dB
- No: 0.24%
- Qts: 0.39
- Qes: 0.43
- Qms: 4.4
- Mms: 117.3 g
- Cms: 208.6 uM/N
- Vas: 32.3 Ltr
- SD: 330 sqCM
- Test Impedance: 1.6-ohms
- VC Impedance: 4-ohm + 4-ohm
- Size: 10 in
- Sensitivity: 91 dB
- Frequency Response: 33 Hz - 500 Hz
- Voice Coil Size: 2 in
- Power Handling (RMS/Peak): 350 / 700 watts
Downloads
L-1004D 10" Subwoofer
Other Views
Recommended Products
- Waterproof design IPX7
- Bluetooth 5.0 Chip provides 30Ft. of wireless range
- Dual 1500mAh Rechargeable Battery’s provide 10 hours of music playback
- TWS True Wireless Stereo
- SPLIT the BT-200 into 2 speakers for Modular Stereo Sound
- Dual Passive Radiators for enhanced Bass Response
- Rubber Bumper Cover for Rugged Protection.
- Dual USB-A to USB-C Charge Cable included
- Bluetooth, Aux & USB Inputs
- AM/FM & Weather Band
- RDS Compatible
- Three Zone RCA Output + Dedicated Subwoofer Output
- User Adjustable Equalizer with Style Presets
- Built-in Subwoofer Crossover
- Built-in High Pass Crossover
- 3" Full Color TFT Screen
- 50W RMS x 4
- Built-in Class D Amplifier
- Video input for use with back up camera (camera not included)
- Marine Rated Water Tight Face
- Works with most aftermarket dash kits for "square" mounting
The MC-200 comes updated with the latest software, to verify it is up to date, go into menu, scroll down to VERSION and check to see that the MC-200 is on MCU V3.6 If you need to update simply click the download button below, download the update file and unzip the file inside to a USB Thumb Drive. Once loaded to your thumb drive power on your MC-200 and insert the drive to the USB dongle, The MC-200 will begin the update, once complete the screen will go dark, immediately remove the USB Drive and the update is complete.
DOWNLOAD UPDATE
- Works with BT-200 SPLIT
- Black Powder-coated finish
- Heavy Duty Laser Cut Steel
- Available in these bar sizes:
- 7/8"
- 1"
- 1 3/8"
- 1 1/2"
- 6 Speaker 250 watt Amplified Bluetooth Powersports Soundbar
- IPX6 Rated
- 2 x 3.5" Square Poly Cone Woofers
- 2 x 3” Full Range Marine Grade Poly Cone Speakers
- 2 x 1” SD Mylar Tweeters
- Heavy Duty Extruded Aluminum Water Tight Housing
- LED back-lit Control Panel
- LED Visual Notifications
- Audible Power On/Off Notifications
- Built In DSP Processor
- Bluetooth and Wired RCA Inputs
- 2 Volt RCA Line Output
- Auto Turn On/Off Circuit
- Waterproof Wire Loom Connectors
- Universal L-Bracket or Stud Bolt-In Mounting System Included
- Universal Top or Bottom Mount Clamp Style Brackets (Sold Separately XL-SBCLAMP2, XL-SBTCLAMP, XL-SBSCLAMP)
- Optional Wireless Remote Control (Sold Separately XL-SBCONRF coming soon)
- Soundbar / POD Square Clamps
- Perfect for Golf Cart Applications
- For use with the XL Soundbars
- Fits 0.75", 1.0", 1.25" square bars
- Non-corrosive black powder coating
- hardware included
- Soundbar / POD Thin Mount Clamps
- Perfect for Under Roof Mount Applications
- For use with the XL Soundbars
- Fits 1.5", 1.75", 2" round bars
- Non-corrosive black powder coating
- hardware included
