ASA3 600.1 Class-A/B Mono Amplifier
- 600 Watt High Efficiency Class A/B Design
- 2-OHM Stable Mono Block Amplifier
- PWM MOSFET Power Supply
- Low Level RCA Input/Low Level RCA Pass Through Output
- Remote Soft Delay Turn On/Off Circuit
- Variable Low Pass Electronic Crossover
- Variable 12dB Bass Boost EQ
- Variable Gain Control
- Wired Secondary Remote Gain Control Included
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
- Switchable Logo Back Lighting
Home > Products > Amplifiers >
ASA3 600.1 Class-A/B Mono Amplifier
Read more
ASA3-600.1 600W RMS @ 2Ω MONO BLOCK CLASS A/B AMPLIFIER
Our A/B Class mono block amplifiers combine our new clean low profile design that still has all the necessary features built into an economical package that puts power and control at your command. Features like a MOSFET power supply, RCA pre-amp out, and variable LPF electronic crossover make these ideally suited to add some punch to any system.
The ASA3-400.1 mono subwoofer amp is a great choice when your’re looking to pound out the bass. With 400 watts, there’s plenty of juice on tap to power our S or M Series single 4-ohm woofers.
Wire a pair of 4-ohm woofers in parallel and the ASA3-400.1 will kick out a solid 400 watts. Need more power, then step up to the ASA3-600.1. Both amps are stable to 2-ohms and come complete with a wired remote controller.
Specifications
- Peak Power: 1200 watts
- Power Supply: Unregulated PWM
- Inputs: RCA Input/RCA Pass-Through Output
- Dimensions (in Inches): 16.8" x 8.3" x 2.3"
- Depth: 16.8"
- Channels (mono): 1
- 4-ohm Power: 300 watts x 1
- 4-ohm Mono Power: n/a
- 2-ohm Power: 600 watts x 1
- 1-ohm Mono Power: N/A
- Selectable Subwoofer EQ: 0-18 dB Gain @ 45Hz
- Variable Subsonic Freq: N/A
- Equalization Boost/Cut: 0 - 18 dB
- Height: 2.3"
- Width: 8.3"
- Subwoofer EQ Frequency: 45 Hz
- Variable Subwoofer EQ: 0 - 18 dB
- Low-Pass Crossover Freq: 40 Hz - 250 Hz
- High-Pass Crossover Freq: n/a
- Crossover Slope: 12 dB
- Input Sensitivity: 0.25 Volts - 6.0 Volts
- S/N Ratio: >94 dB
- Total Harmonic Distortion: 0.3% @ Rated Power
- Strapped Output Power @ 2ohms: N/A
- Output Power (14.4 V) @ 4 ohm: 300 watts x 1
- Output Power (14.4 V) @ 2 ohm: 600 watts x 1
- Output Power (14.4 V) @ 1 ohm: N/A
- Frequency Response: 20 Hz - 22 kHz
Downloads
ASA3 600.1 Class-A/B Mono Amplifier
Recommended Products
- Waterproof design IPX7
- Bluetooth 5.0 Chip provides 30Ft. of wireless range
- Dual 1500mAh Rechargeable Battery’s provide 10 hours of music playback
- TWS True Wireless Stereo
- SPLIT the BT-200 into 2 speakers for Modular Stereo Sound
- Dual Passive Radiators for enhanced Bass Response
- Rubber Bumper Cover for Rugged Protection.
- Dual USB-A to USB-C Charge Cable included
- Waterproof design IPX7
- Bluetooth 5.3 Chip provides 30Ft. of wireless range
- RGB Lighting with User Selectable Effects
- User Selectable Equalizer
- USB-A for use with Thumb Drive Music Storage
- USB-A for charging mobile devices
- Built in Microphone for handsfree calling
- 3600mAh Rechargeable Battery provides 7 hours of music playback
- TWS True Wireless Stereo – connect 2 BT-500 Tubes together for true wireless stereo sound
- Shoulder Strap for easy carry
- USB-C Charge Cable included
- 900 Watt High Efficiency Full-Range Class D Design
- Front Load Terminal Design
- 2-OHM Stable Six Channel Amplifier
- Ultra Low Current Draw
- Double Sided Copper Plated PCB
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- Variable Subsonic Filter
- High Current Voltage Ripple Rejection Circuitry
- Balanced RCA Inputs
- Selectable Auto Turn On Circuit
- Remote Soft Delay Turn On/Off Circuit
- 40 Click Variable Detente High/Low Pass Electronic Crossover
- LPF / HPF / x10 BandPass Filter Selector Switch
- Variable Gain Control
- Calibrated Visual Clip Indicator
- Wired Secondary Remote Gain Control Included
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Digital Signal Processor for system integration.
- Wireless / APP Control compatible with PBX-DSP8.
- Auto Turn on with DC Offset
- High and Low level input
- Low Level user adjustable Outputs
- 8 Channels input / 8 channels output
- Amplifier remote turn on with user selectable delay
Processing Features:
- 32-Bit Digital Signal Processing
- 31 Band User Adjustable Equalization per channel
- User Adjustable Delay and Gain per channel
- User Adjustable Crossover Network with adjustable slopes 6 - 48db
- User Selectable Phase control per channel 0 / 180 degrees
- Adjustable input voltage per channel pairings 250mV - 9V
- Marine Grade 8" 2-Way Pod Speakers
- Dual Thin Mount Hoop Rotatable Mounting Bracket
- RGB Illumination *Compatible with XL-RGB1
- Injection Molded UV-Treated Silver Polypropylene Cones
- Water Tight TPU Surround
- Grill Mounted 25mm SD Mylar Tweeter
- UV Inhibited Injection Molded Plastic Pod
- UV-treated Aluminum Mesh Grills
- Fits Bar Sizes 1.5", 1.875", & 2"
- 4-Ohm System Impedance
- Sold in Pairs w/Mounting Brackets and RGB Lighting
- Universal RGB Controller
- iOS and Android App Controlled
- IPX6 Rated
- Waterproof Sealed Design
- Infinite Color Choices
- 15 PreSet Effects
- Create your own Effects and Color Patterns
- Plug and Play with PowerBass XL RGB Speakers
