ASA3 1500.1D Class-D 1ch Amplifier
- 1,500 Watt High Efficiency Class D Design
- 1-OHM Stable Mono Block Amplifier
- Double Sided Circuit Board Construction
- PWM MOSFET Power Supply
- Low Level RCA Input/Low Level RCA Pass Through Output
- Remote Soft Delay Turn On/Off Circuit
- Variable Low Pass Electronic Crossover
- Variable 12dB Bass Boost EQ
- Variable Gain Control
- Wired Secondary Remote Gain Control Included
- Internal Thermal Cooling Fan
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
- Strapable Dual Amp Power Doubling Circuit (Amp-to-Amp Bridged at 2 ohm minimum)
- Switchable Logo Back Lighting


ASA3-1500.1D 1,500W RMS @ 1Ω MONO BLOCK CLASS-D AMPLIFIER
To give your subwoofers some serious power at an affordable price, we offer the ASA3 range in super efficient Class D power. This line offers amplifiers that can provide up to 1,500 watts to a single woofer (if it can take it).
Our ASA3 Class D amplifiers are always 1-ohm stable, and still come complete with all our sought after features like subsonic filters to keep ultra low frequencies from zapping power from frequencies that you do not want to reproduce and protection circuitry that will keep your amplifier from blowing up during duress.
Our Bass EQ control also gives you the ability to increase your subwoofers output by up to 18dB at the earth shaking frequency of 45 Hz to give your competition the knockout punch.
To finish these amps off, we include a remote secondary level control to give you the ultimate in subwoofer volume control from the cockpit of of your vehicle.
Specifications
- Peak Power: 3000 watts
- Subwoofer Frequency Range: 20 Hz - 150 Hz
- Power Supply: Unregulated PWM
- Inputs: RCA Input/RCA Pass-Through Output
- Dimensions (in Inches): 16.6" x 9.4" x 2.3"
- Depth: 16.6"
- Channels (mono): 1
- 4-ohm Power: 500 watts x 1
- 2-ohm Power: 1000 watts x 1
- 1-ohm Mono Power: 1500 watts x 1
- Selectable Subwoofer EQ: 0-18 dB Gain @ 45Hz
- Variable Subsonic Freq: 15 Hz - 50 Hz
- Equalization Boost/Cut: 0 - 18 dB
- Height: 2.3"
- Width: 9.4"
- Subwoofer EQ Frequency: 45 Hz
- Variable Subwoofer EQ: 0 - 18 dB
- Low-Pass Crossover Freq: 50 Hz -150 Hz
- High-Pass Crossover Freq: N/A
- Crossover Slope: 12 dB
- Input Sensitivity: 0.25 V - 6.0 V
- S/N Ratio: >80 dB
- Total Harmonic Distortion: 0.5% at Rated Power
- Strapped Output Power @ 2ohms: 3000 watts x 1
- Output Power (14.4 V) @ 4 ohm: 1000 watts x 1
- Output Power (14.4 V) @ 2 ohm: 1000 watts x 1
- Output Power (14.4 V) @ 1 ohm: 1500 watts x 1
- Frequency Response: 20 Hz - 250 Hz
Downloads
ASA3 1500.1D Class-D 1ch Amplifier

Recommended Products
- Waterproof design IPX7
- Bluetooth 5.0 Chip provides 30Ft. of wireless range
- Dual 1500mAh Rechargeable Battery’s provide 10 hours of music playback
- TWS True Wireless Stereo
- SPLIT the BT-200 into 2 speakers for Modular Stereo Sound
- Dual Passive Radiators for enhanced Bass Response
- Rubber Bumper Cover for Rugged Protection.
- Dual USB-A to USB-C Charge Cable included
- Works with BT-200 SPLIT
- Black Powder-coated finish
- Heavy Duty Laser Cut Steel
- Available in these bar sizes:
- 7/8"
- 1"
- 1 3/8"
- 1 1/2"
- 6 Speaker 250 watt Amplified Bluetooth Powersports Soundbar
- IPX6 Rated
- 2 x 3.5" Square Poly Cone Woofers
- 2 x 3” Full Range Marine Grade Poly Cone Speakers
- 2 x 1” SD Mylar Tweeters
- Heavy Duty Extruded Aluminum Water Tight Housing
- LED back-lit Control Panel
- LED Visual Notifications
- Audible Power On/Off Notifications
- Built In DSP Processor
- Bluetooth and Wired RCA Inputs
- 2 Volt RCA Line Output
- Auto Turn On/Off Circuit
- Waterproof Wire Loom Connectors
- Universal L-Bracket or Stud Bolt-In Mounting System Included
- Universal Top or Bottom Mount Clamp Style Brackets (Sold Separately XL-SBCLAMP2, XL-SBTCLAMP, XL-SBSCLAMP)
- Optional Wireless Remote Control (Sold Separately XL-SBCONRF coming soon)
- Universal RGB Controller
- iOS and Android App Controlled
- IPX6 Rated
- Waterproof Sealed Design
- Infinite Color Choices
- 15 PreSet Effects
- Create your own Effects and Color Patterns
- Plug and Play with PowerBass XL RGB Speakers
- Soundbar / POD Square Clamps
- Perfect for Golf Cart Applications
- For use with the XL Soundbars
- Fits 0.75", 1.0", 1.25" square bars
- Non-corrosive black powder coating
- hardware included
- Soundbar / POD Thin Mount Clamps
- Perfect for Under Roof Mount Applications
- For use with the XL Soundbars
- Fits 1.5", 1.75", 2" round bars
- Non-corrosive black powder coating
- hardware included
