PS-ADF110T 10" Amplified Downfiring Enclosure
- Single 10" 175 Watt RMS Amplified Downfiring Enclosure
- Computer Optimized 10" Thin Subwoofer Enclosure
- Custom Injected Molded Cone
- Large Roll Rubber Surround
- 2" Vented KSV Voice Coil Former
- Perimeter Aero Voice Coil Venting
- Poly-carbonate/Glass Fiber Composite Turbine Basket
- Chrome Push Terminals
- 2-Tone Vinyl/Carpet Finish
- 1-Channel 275 Watt High Efficiency Class A/B Design
- High Level (Speaker)/Low Level RCA input
- Soft Delay Turn On/Off Circuit
- Auto Turn-on (high level input only)
- Variable Low Pass Electronic Crossover 50Hz - 200Hz
- Variable 12db Bass Boost EQ @ 45Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
- Wired Remote Gain Control Included
- Down Firing Air Suspension Enclosure
- Heavy-Duty Reinforced Box Design
- Mounting Hardware Included

Home > Products > Loaded enclosures >
PS-ADF110T 10" Amplified Downfiring Enclosure
Read more
PS-ADF110T 10" AMPLIFIED DOWNFIRING ENCLOSURE
Our latest release is an Amplified down firing single 10-inch woofer enclosure designed for pick-ups, crew cabs and king cabs. The PS-ADF110T uses an "S" thin woofer and is finished in a mix of grey vinyl and black carpet and comes with a built in 175W RMS amplifier.
By having the woofer point downward helps load the front of the woofer for more bass output than a standard front firing enclosure. It's small size makes it an instant winner for producing the bass that is missing in your system without taking up a lot of room or breaking the bank.
Specifications
- Peak Power: 500W
- Dimensions (in Inches): 5.6" x 12.4" x 17.8"
- Depth: 17.8"
- 4-ohm Power: 275W
- 4-ohm Mono Power: 275W
- Selectable Subwoofer EQ: 45Hz
- Nominal Impedance: 4-ohm
- Height: 5.6"
- Width: 12.4"
- Voice Coil Size: 2 in
- Material: pp cone
- Magnet Size: 116 oz
- Sensitivity (1W / 1M): 91 db
- Low-Pass Crossover Freq: 50Hz-200Hz
- Output Power (14.4 V) @ 4 ohm: 275W
- Size: 10 in shallow
- Frequency Response: 38Hz - 280Hz
- Voice Coil Size: 2"
- Power Handling (RMS/Peak): 275 / 500 watts
Downloads
PS-ADF110T 10" Amplified Downfiring Enclosure
Recommended Products
BT-200 PowerBass SPLIT IPX7 Portable Bluetooth Speaker
READ MORE
- Waterproof design IPX7
- Bluetooth 5.0 Chip provides 30Ft. of wireless range
- Dual 1500mAh Rechargeable Battery’s provide 10 hours of music playback
- TWS True Wireless Stereo
- SPLIT the BT-200 into 2 speakers for Modular Stereo Sound
- Dual Passive Radiators for enhanced Bass Response
- Rubber Bumper Cover for Rugged Protection.
- Dual USB-A to USB-C Charge Cable included
BT-500 PowerBass Sound Tube IPX7 Portable Bluetooth Speaker
READ MORE
- Waterproof design IPX7
- Bluetooth 5.3 Chip provides 30Ft. of wireless range
- RGB Lighting with User Selectable Effects
- User Selectable Equalizer
- USB-A for use with Thumb Drive Music Storage
- USB-A for charging mobile devices
- Built in Microphone for handsfree calling
- 3600mAh Rechargeable Battery provides 7 hours of music playback
- TWS True Wireless Stereo – connect 2 BT-500 Tubes together for true wireless stereo sound
- Shoulder Strap for easy carry
- USB-C Charge Cable included
OE42-T3Y TESLA OEM Upgrade 4" Full Range Coaxials
TESLA OEM Upgrade Full Range Coaxials 4" OEM Fit Upgrade Full Range Coaxials
50 Watts RMS/100 Watts Max
Poly Mica Cone 3/4" Mylar Dome Tweeter
Nylon OEM Speaker Adapter
Factory Plug and Play Wiring Adapters
READ MORE
-
APPLICATIONS
- MODEL 3 (2018 - 2024)
- MODEL Y (2020 - 2025)
- CYBER TRUCK
- MODEL 3 HIGHLAND
- MODEL Y JUNIPER
To check your fitment with our OE Series Direct Fit and Special Application Speaker please click the button below to view our OE SERIES FITMENT GUIDE. Please note Speakers may fit in other make / model applications other than those listed above, be sure to have a certified installer verify which size you have in your vehicle before purchase.
FITMENT GUIDE
OE8C-T3Y TESLA OEM Replacement 8" Component System
TESLA OEM Replacement Component System 8" Upgraded OEM Woofers 1" Silk Dome Tweeters
90 Watts RMS/180 Watts Max
Treated Paper Cone
Nylon OEM Speaker Adapter
Factory Plug and Play Wiring Adapters
READ MORE
-
APPLICATIONS
- MODEL 3 (2018 - 2024)
- MODEL Y (2020 - 2025)
- CYBER TRUCK
- MODEL 3 HIGHLAND
- MODEL Y JUNIPER
To check your fitment with our OE Series Direct Fit and Special Application Speaker please click the button below to view our OE SERIES FITMENT GUIDE. Please note Speakers may fit in other make / model applications other than those listed above, be sure to have a certified installer verify which size you have in your vehicle before purchase.
FITMENT GUIDE
PBX-600.6 6ch Compact Amplifier
READ MORE
- 900 Watt High Efficiency Full-Range Class D Design
- Front Load Terminal Design
- 2-OHM Stable Six Channel Amplifier
- Ultra Low Current Draw
- Double Sided Copper Plated PCB
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- Variable Subsonic Filter
- High Current Voltage Ripple Rejection Circuitry
- Balanced RCA Inputs
- Selectable Auto Turn On Circuit
- Remote Soft Delay Turn On/Off Circuit
- 40 Click Variable Detente High/Low Pass Electronic Crossover
- LPF / HPF / x10 BandPass Filter Selector Switch
- Variable Gain Control
- Calibrated Visual Clip Indicator
- Wired Secondary Remote Gain Control Included
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
PBX-DSP8 8 Channel Digital Signal Processor
READ MORE
- Digital Signal Processor for system integration.
- Wireless / APP Control compatible with PBX-DSP8.
- Auto Turn on with DC Offset
- High and Low level input
- Low Level user adjustable Outputs
- 8 Channels input / 8 channels output
- Amplifier remote turn on with user selectable delay
Processing Features:
- 32-Bit Digital Signal Processing
- 31 Band User Adjustable Equalization per channel
- User Adjustable Delay and Gain per channel
- User Adjustable Crossover Network with adjustable slopes 6 - 48db
- User Selectable Phase control per channel 0 / 180 degrees
- Adjustable input voltage per channel pairings 250mV - 9V
PBX-PRO6CD 6.5" Compression Horn Co-Axials
READ MORE
- 6.5" Pro Audio Compression Driver Co-Axial
- 1" Aluminum Compression Horn Tweeter
- Hybrid Carbon/DDC Treated Paper Cone
- Butyl Rubber Surround
- Compression Push Input Terminals
- 1.5" BASV Voice Coil
- 4-ohm Impedance
- 20oz. Y-35 Grade Motor Structure
- Vented Pole Piece
- Sold in Pairs
- Grill Included






















