3XL-653 6.5" Full Range
- 6.5" Co-Axial Speaker System
- OEM Drop in Replacement Design
- Twill woven S2 Fiberglass Woofer Cone
- Progressive Double Roll PU Surround
- 13 oz. Y-35 Magnet Structure
- EFF Motor Structures (Efficient Flux Field)
- Rigid Tooled Basket With Flat Black Finish
- 1" Silk Dome Tweeter
- 3-ohm System Impedance
Home > Products > Full range coaxials >
3XL-653 6.5" Full Range
Read more
3XL-653 6.5" CO-AXIAL XTREME FIBERGLASS CONE SPEAKER SYSTEMS
Looking for superior sound and performance while at the same time seeking unbelievable value, then look no more. For our top-of-the-line coaxial, our engineers took a no compromise approach to sound quality by using an esoteric twill woven cone material known as S2 Fiberglass and sealing it with a gel coating to strengthen the cone and reduce resonance.
But they didn’t stop there, they designed a dual roll rubber surround for more bass and employed a ultra efficient Y-35 grade magnet assembly to increase power handling. Finally, they added a diffuser to our proprietary Emperors Silk dome tweeter for improved high frequency imaging. The result is one of our best sounding speakers ever!
Specifications
- Nominal Impedance: 3-ohm
- Material: Twill woven S-2 fiberglass / silk dome tweeter
- Magnet Size: 13 oz
- Sensitivity (1W / 1M): 86 dB
- Mounting Depth: 2.56 in
- VC Impedance:
- Size: 6.5 in
- Sensitivity: 86 dB
- Frequency Response: 55 Hz - 22 kHz
- Voice Coil Size:
- Power Handling (RMS/Peak): 90 / 180 watts
Downloads
3XL-653 6.5" Full Range
Recommended Products
IN STOCK NOW!
- Extruded Aluminum Casing
- Built-in Rechargeable Li-ion Battery 1900mAH
- Micro USB 5V Charging
- Enhanced Ported Bass Response
- 3.5mm Aux input
- Single 10" 175 Watt RMS Amplified Downfiring Enclosure
- Computer Optimized 10" Thin Subwoofer Enclosure
- Custom Injected Molded Cone
- Large Roll Rubber Surround
- 2" Vented KSV Voice Coil Former
- Perimeter Aero Voice Coil Venting
- Poly-carbonate/Glass Fiber Composite Turbine Basket
- Chrome Push Terminals
- 2-Tone Vinyl/Carpet Finish
- 1-Channel 275 Watt High Efficiency Class A/B Design
- High Level (Speaker)/Low Level RCA input
- Soft Delay Turn On/Off Circuit
- Auto Turn-on (high level input only)
- Variable Low Pass Electronic Crossover 50Hz - 200Hz
- Variable 12db Bass Boost EQ @ 45Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
- Wired Remote Gain Control Included
- Down Firing Air Suspension Enclosure
- Heavy-Duty Reinforced Box Design
- Mounting Hardware Included
- 4-Band Dual Zone Active Equalizer Bass, Mid-Bass, Mid, High
- 3 Zone Volume Control and Output
- Variable Master Volume Control
- Front Panel Selectable Inputs - Bluetooth, Aux, RCA
- Front Panel Tri Illumination Selector - Red, Blue, Green
- Front Panel Track Selector - Track Up / Down
- 6V RMS output
- Bi-Polar PWM Power Supply
- Frequency Response: 20Hz-40KHz
- Selectable 120/80Hz Subwoofer Crossover
- Conformal Coated PCB
IN STOCK NOW!
- 12 Speaker 500 watt Amplified Bluetooth Powersports Soundbar
- IPX6 Rated
- 6 x 3.5" Square Poly Cone Woofers
- 2 x 3” Full Range Marine Grade Poly Cone Speakers
- 4 x 1” SD Mylar Tweeters
- Heavy Duty Extruded Aluminum Water Tight Housing
- LED back-lit Control Panel
- LED Visual Notifications
- Audible Power On/Off Notifications
- Built In DSP Processor w/Distortion Limiter
- Bluetooth and Wired Inputs
- 2 Volt Line Output
- Auto Turn On/Off Circuit
- Waterproof Wire Loom Connectors
- Universal L-Bracket Mounting System Included
- Universal Top or Bottom Mount Clamp Style Brackets (Sold Separately XL-SBCLAMP, XL-SBTCLAMP, XL-SBSCLAMP)
- Secondary Dash Mountable Controller Pad (Sold Separately XL-SBCON)
- CRS 4.0 Bluetooth Protocol
- >30' Bluetooth Range
- RCA Audio Output
- Power, Track Up/Down & Volume Up/Down
- USB 5V Charging Port
- 12V Remote Amplifier Turn On/Off Lead
- Detente buttons for easy use with gloves
- Water resistant cables and connectors
- Surface or Flush Mount
- Soundbar / POD Square Clamps
- Perfect for Golf Cart Applications
- For use with the XL Soundbars, or XL POD models
- Fits 0.75", 1.0", 1.25" square bars
- Non-corrosive black powder coating
- hardware included
- Soundbar / POD Thin Mount Clamps
- Perfect for Under Roof Mount Applications
- For use with the XL Soundbars, or XL POD models
- Fits 1.5", 1.75", 2" round bars
- Non-corrosive black powder coating
- hardware included
- 800 Watt High Efficiency Class D Design
- 1-OHM Stable Mono Block Amplifier
- Ultra Low Current Draw
- Double Sided Copper Plated PCB
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- Variable Subsonic Filter
- High Current Voltage Ripple Rejection Circuitry
- Balanced RCA Inputs
- Auto Turn On/Off
- Remote Soft Delay Turn On/Off Circuit
- 40 Click Variable Low Pass Electronic Crossover
- 40 Click Variable Frequency/18dB Bass Boost EQ
- Variable Gain Control
- Wired Secondary Remote Gain Control Included
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Strapable Dual Amp Power Doubling Circuit (Amp-to-Amp Bridged at 2 ohm minimum)
