3XL-1220D 12" Subwoofer
- New PBX logo dust cap
- 12" Dual 2-Ohm Subwoofer
- 1000 watt RMS/2000 Watts Max
- DDC Pressed Paper Cone
- High Roll Nitrile Butadine Rubber (NBR) Surrond
- 3” Vented HD BASV Voice Coil Former
- Perimeter Aero-Vent Voice Coil Cooling Vents
- Non Resonance DDC Coated Cast Aluminum Basket
- XTRA XTRA XTRA Large Triple Stacked Motor Structure
- Square Spring Loaded Nickel Plated Push Terminals
- Optimally Designed for Ported Enclosures


3XL-1220D 12" 3XL HIGH OUTPUT SUBWOOFER
Making our best even better is what our engineers accomplished for the newly redesigned 3XL subwoofer series. Combining a new bold look with the innovation that the 3XL series is known for, PowerBass created our most accomplished High Output Subwoofer to date.
The 3XL series have been designed to withstand the extreme heat that the new generation Class “D” amplifiers create. Class “D” amplifiers heat up the woofers voice coil two to three times hotter and faster than a conventional class A/B amplifier. This calls for Xtreme measures and special parts to classify these as a true “Class D Subwoofer”. But hey, this is PowerBass. We have it under control.
First, we use industrial assembly glues that are made in the USA that handle this excessive heat that would normally tear a conventional subwoofer apart. Then there is perimeter venting to allow air movement over the voice coil built into our custom cut, cast aluminum basket. The basket works as a strong foundation for our heavy duty non-pressed raw pulp paper cone and redesigned inverted PBX dustcap. The roughness of the cone breaks up standing long waves for an even louder output resulting in greater SPL.
The 3XL 12" Subwoofers all feature 3” HD BASV voice coil formers high temperature voice coil winding to help dissipate heat. To allow full movement of the cone, we utilize an ultra high roll NBR Nitrile Butadiene Rubber surround that increases the cone area for higher output along with linear cone stability throughout the subwoofers 3.5” of peak to peak excursion.
To make sure high voltages from the amplifier reach the subwoofers, we designed our new square spring loaded nickel plated push terminals and incorporated FEA optimized Xtra Xtra Xtra large triple stacked magnets to handle the high power these subwoofers are designed for.
3XL Subwoofers are available in 12” and 15” sizes in either dual 1-OHM or dual 2-OHM versions to maximize your amplifiers power.
Specifications
- Fs: 35.1 Hz
- Cutout Diameter: 11.06 in (282mm)
- BL: 18.99
- Nominal Impedance: Dual 2-ohm
- Voice Coil Size: 3 in
- Material: Pressed and Treated Paper Cone
- Magnet Size: 228.46 oz
- Sensitivity (1W / 1M): 88 dB
- Motor Structure: 228.46 oz
- Mounting Depth: 9 in
- Xmax: 19 mm
- Spl: 84.32 dB
- No: 0.163%
- Qts: 0.599
- Qes: 0.716
- Qms: 5.533
- Mms: 292.92 g
- Cms: 70 uM/N
- Vas: 27.96 Ltr
- SD: 530.9 sqCM
- Test Impedance: 4-ohms
- VC Impedance: 2-ohm +2-ohm
- Size: 12 in
- Sensitivity: 88 dB
- Frequency Response: 25 Hz - 450 Hz
- Voice Coil Size: 3 in
- Power Handling (RMS/Peak): 1000 / 2000 watts
Downloads
3XL-1220D 12" Subwoofer

Recommended Products
- Waterproof design IPX7
- Bluetooth 5.0 Chip provides 30Ft. of wireless range
- Dual 1500mAh Rechargeable Battery’s provide 10 hours of music playback
- TWS True Wireless Stereo
- SPLIT the BT-200 into 2 speakers for Modular Stereo Sound
- Dual Passive Radiators for enhanced Bass Response
- Rubber Bumper Cover for Rugged Protection.
- Dual USB-A to USB-C Charge Cable included
- Works with BT-200 SPLIT
- Black Powder-coated finish
- Heavy Duty Laser Cut Steel
- Available in these bar sizes:
- 7/8"
- 1"
- 1 3/8"
- 1 1/2"
- 6 Speaker 250 watt Amplified Bluetooth Powersports Soundbar
- IPX6 Rated
- 2 x 3.5" Square Poly Cone Woofers
- 2 x 3” Full Range Marine Grade Poly Cone Speakers
- 2 x 1” SD Mylar Tweeters
- Heavy Duty Extruded Aluminum Water Tight Housing
- LED back-lit Control Panel
- LED Visual Notifications
- Audible Power On/Off Notifications
- Built In DSP Processor
- Bluetooth and Wired RCA Inputs
- 2 Volt RCA Line Output
- Auto Turn On/Off Circuit
- Waterproof Wire Loom Connectors
- Universal L-Bracket or Stud Bolt-In Mounting System Included
- Universal Top or Bottom Mount Clamp Style Brackets (Sold Separately XL-SBCLAMP2, XL-SBTCLAMP, XL-SBSCLAMP)
- Optional Wireless Remote Control (Sold Separately XL-SBCONRF coming soon)
- Universal RGB Controller
- iOS and Android App Controlled
- IPX6 Rated
- Waterproof Sealed Design
- Infinite Color Choices
- 15 PreSet Effects
- Create your own Effects and Color Patterns
- Plug and Play with PowerBass XL RGB Speakers
- Soundbar / POD Square Clamps
- Perfect for Golf Cart Applications
- For use with the XL Soundbars
- Fits 0.75", 1.0", 1.25" square bars
- Non-corrosive black powder coating
- hardware included
- Soundbar / POD Thin Mount Clamps
- Perfect for Under Roof Mount Applications
- For use with the XL Soundbars
- Fits 1.5", 1.75", 2" round bars
- Non-corrosive black powder coating
- hardware included
