2XL-683 6x8" Full Range
- 6x8" Co-Axial Speaker System
- OEM Drop in Replacement Design
- Hybrid 4 Layer Paper/Wool Blend Woofer Cone
- Butyl Rubber Surround
- 14 oz. Motor Structure
- EFF Motor Structures (Efficient Flux Field)
- Rigid Tooled Basket With Flat Black Finish
- 1" Silk Dome Tweeter
- 3-ohm System Impedance
Read more
2XL-683 6x8" XTREME CO-AXIAL SPEAKER SYSTEM
Our engineers have raised the bar on great sound with the introduction of the new 2XL range of coaxial speakers. Completely redesigned for 2016 the 2XL series deliver crystal clear sound quality with deep warm tones.
If you need a high quality speaker yet have a vehicle with special mounting requirements, this is the series for you. Whether you need a 4” or a 6”x8” coaxial, we can fit most needs. We even offer a 6.5” thin mount speaker where you want all of the bass but do not have much space.
The 2XL series also uses the 3-0 system, 3-Ohm impedance for more efficient use of your amplifier's power. With Butyl Rubber surrounds, you get high efficiency and lower bass response with lower distortion. Our new Emperors’ Silk Dome Tweeter and Non-Woven Wool Paper Cone team up to give you deep, warm and accurate sound that you can listen to for hours without fatigue.
Our redesigned tweeters are using a very high grade Emperors Silk that has been enhanced with Ferrofluid®. Ferrofluid is a liquid infused with magnetic particles that was developed by NASA—it creates less friction resulting in louder distortion free high frequencies.
Specifications
- Nominal Impedance: 3-ohm
- Material: Non woven wool paper / silk dome tweeter
- Magnet Size: 14 oz
- Sensitivity (1W / 1M): 91 dB
- Mounting Depth: 2.6 in
- Size: 6x8 in
- Sensitivity: 91 dB
- Frequency Response: 53 Hz - 20 kHz
- Power Handling (RMS/Peak): 75 / 150 watts
Downloads
2XL-683 6x8" Full Range
Recommended Products
IN STOCK NOW!
- Extruded Aluminum Casing
- Built-in Rechargeable Li-ion Battery 1900mAH
- Micro USB 5V Charging
- Enhanced Ported Bass Response
- 3.5mm Aux input
- Single 10" 175 Watt RMS Amplified Downfiring Enclosure
- Computer Optimized 10" Thin Subwoofer Enclosure
- Custom Injected Molded Cone
- Large Roll Rubber Surround
- 2" Vented KSV Voice Coil Former
- Perimeter Aero Voice Coil Venting
- Poly-carbonate/Glass Fiber Composite Turbine Basket
- Chrome Push Terminals
- 2-Tone Vinyl/Carpet Finish
- 1-Channel 275 Watt High Efficiency Class A/B Design
- High Level (Speaker)/Low Level RCA input
- Soft Delay Turn On/Off Circuit
- Auto Turn-on (high level input only)
- Variable Low Pass Electronic Crossover 50Hz - 200Hz
- Variable 12db Bass Boost EQ @ 45Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
- Wired Remote Gain Control Included
- Down Firing Air Suspension Enclosure
- Heavy-Duty Reinforced Box Design
- Mounting Hardware Included
- 4-Band Dual Zone Active Equalizer Bass, Mid-Bass, Mid, High
- 3 Zone Volume Control and Output
- Variable Master Volume Control
- Front Panel Selectable Inputs - Bluetooth, Aux, RCA
- Front Panel Tri Illumination Selector - Red, Blue, Green
- Front Panel Track Selector - Track Up / Down
- 6V RMS output
- Bi-Polar PWM Power Supply
- Frequency Response: 20Hz-40KHz
- Selectable 120/80Hz Subwoofer Crossover
- Conformal Coated PCB
IN STOCK NOW!
- 12 Speaker 500 watt Amplified Bluetooth Powersports Soundbar
- 6 x 3.5" Square Poly Cone Woofers
- 2 x 3” Full Range Marine Grade Poly Cone Speakers
- 4 x 1” SD Mylar Tweeters
- Heavy Duty Extruded Aluminum Water Tight Housing
- LED back-lit Control Panel
- LED Visual Notifications
- Audible Power On/Off Notifications
- Built In DSP Processor w/Distortion Limiter
- Bluetooth and Wired Inputs
- 2 Volt Line Output
- Auto Turn On/Off Circuit
- Waterproof Wire Loom Connectors
- Universal L-Bracket Mounting System Included
- Universal Top or Bottom Mount Clamp Style Brackets (Sold Separately XL-SBCLAMP, XL-SBTCLAMP, XL-SBSCLAMP)
- Secondary Dash Mountable Controller Pad (Sold Separately XL-SBCON)
- CRS 4.0 Bluetooth Protocol
- >30' Bluetooth Range
- RCA Audio Output
- Power, Track Up/Down & Volume Up/Down
- USB 5V Charging Port
- 12V Remote Amplifier Turn On/Off Lead
- Detente buttons for easy use with gloves
- Water resistant cables and connectors
- Surface or Flush Mount
- 800 Watt High Efficiency Class D Design
- 1-OHM Stable Mono Block Amplifier
- Ultra Low Current Draw
- Double Sided Copper Plated PCB
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- Variable Subsonic Filter
- High Current Voltage Ripple Rejection Circuitry
- Balanced RCA Inputs
- Auto Turn On/Off
- Remote Soft Delay Turn On/Off Circuit
- 40 Click Variable Low Pass Electronic Crossover
- 40 Click Variable Frequency/18dB Bass Boost EQ
- Variable Gain Control
- Wired Secondary Remote Gain Control Included
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Strapable Dual Amp Power Doubling Circuit (Amp-to-Amp Bridged at 2 ohm minimum)
