2XL-1004D 10" Subwoofer
- 10" Dual 4-Ohm Subwoofer
- 400 watt RMS/800 Watts Max
- Proprietary IMFPM Cone
- High Roll Santoprene® Surround
- 2.5" Vented BKSV Voice Coil Former
- Perimeter Aero-Vent Voice Coil Cooling Vents
- Non Resonance DDC Coated Cast Aluminum Basket
- XTRA XTRA Large Double Stacked Motor Structures
- Proprietary Pro-Lock Input Terminals
- Optimally Designed for Both Small Sealed or Ported Enclosures
Read more
2XL-1004D 10" ACCURATE & TIGHT BASS SUBWOOFERS
Our new 2XL Subwoofers have been completely redesigned to work in small sealed or ported enclosures, the 2XL Subwoofer series allows for audiophile sound quality at Xtreme sound levels.
Featuring a new U-turn High Roll Santoprene surround for increased linear accuracy and a proprietary three layer PP Matrix cone the 2XL series is built to perform. The custom cast aluminum basket provides perimeter venting to assist in cooling the newly redesigned 2.5” Black Kapton (BKSV) voice coil.
Xtra Xtra large double stacked motor structures covered with our new look protective boot for high power handing and proprietary Pro-lock terminals insure optimal current transfer from the amplifier to the woofer for the loudest possible SPL.
Specifications
- Fs: 34 Hz
- Cutout Diameter: 9.375" (236mm)
- BL: 11.4
- Nominal Impedance: Dual 4-ohm
- Voice Coil Size: 2.5 in
- Material: IMFPM / PP Matrix
- Magnet Size: 280 oz
- Sensitivity (1W / 1M): 91 dB
- Motor Structure: 280 oz
- Mounting Depth: 5.78 in
- Xmax: 13 mm
- Spl: 91 dB
- No: 0.18%
- Qts: 0.41
- Qes: 0.45
- Qms: 5.1
- Mms: 176.2 g
- Cms: 118.6 uM/N
- Vas: 20.2 Ltr
- SD: 346 sqCM
- Test Impedance: 1.7-ohm
- VC Impedance: 4-ohm + 4-ohm
- Size: 10 in
- Sensitivity: 91 dB
- Frequency Response: 30 Hz - 500 Hz
- Voice Coil Size: 2.5 in
- Power Handling (RMS/Peak): 400 / 800 watts
Downloads
2XL-1004D 10" Subwoofer
Recommended Products
- Waterproof design IPX7
- Bluetooth 5.0 Chip provides 30Ft. of wireless range
- Dual 1500mAh Rechargeable Battery’s provide 10 hours of music playback
- TWS True Wireless Stereo
- SPLIT the BT-200 into 2 speakers for Modular Stereo Sound
- Dual Passive Radiators for enhanced Bass Response
- Rubber Bumper Cover for Rugged Protection.
- Dual USB-A to USB-C Charge Cable included
- Bluetooth, Aux & USB Inputs
- AM/FM & Weather Band
- RDS Compatible
- Three Zone RCA Output + Dedicated Subwoofer Output
- User Adjustable Equalizer with Style Presets
- Built-in Subwoofer Crossover
- Built-in High Pass Crossover
- 3" Full Color TFT Screen
- 50W RMS x 4
- Built-in Class D Amplifier
- Video input for use with back up camera (camera not included)
- Marine Rated Water Tight Face
- Works with most aftermarket dash kits for "square" mounting
The MC-200 comes updated with the latest software, to verify it is up to date, go into menu, scroll down to VERSION and check to see that the MC-200 is on MCU V3.6 If you need to update simply click the download button below, download the update file and unzip the file inside to a USB Thumb Drive. Once loaded to your thumb drive power on your MC-200 and insert the drive to the USB dongle, The MC-200 will begin the update, once complete the screen will go dark, immediately remove the USB Drive and the update is complete.
DOWNLOAD UPDATE
- Works with BT-200 SPLIT
- Black Powder-coated finish
- Heavy Duty Laser Cut Steel
- Available in these bar sizes:
- 7/8"
- 1"
- 1 3/8"
- 1 1/2"
- 6 Speaker 250 watt Amplified Bluetooth Powersports Soundbar
- IPX6 Rated
- 2 x 3.5" Square Poly Cone Woofers
- 2 x 3” Full Range Marine Grade Poly Cone Speakers
- 2 x 1” SD Mylar Tweeters
- Heavy Duty Extruded Aluminum Water Tight Housing
- LED back-lit Control Panel
- LED Visual Notifications
- Audible Power On/Off Notifications
- Built In DSP Processor
- Bluetooth and Wired RCA Inputs
- 2 Volt RCA Line Output
- Auto Turn On/Off Circuit
- Waterproof Wire Loom Connectors
- Universal L-Bracket or Stud Bolt-In Mounting System Included
- Universal Top or Bottom Mount Clamp Style Brackets (Sold Separately XL-SBCLAMP2, XL-SBTCLAMP, XL-SBSCLAMP)
- Optional Wireless Remote Control (Sold Separately XL-SBCONRF coming soon)
- Soundbar / POD Square Clamps
- Perfect for Golf Cart Applications
- For use with the XL Soundbars
- Fits 0.75", 1.0", 1.25" square bars
- Non-corrosive black powder coating
- hardware included
- Soundbar / POD Thin Mount Clamps
- Perfect for Under Roof Mount Applications
- For use with the XL Soundbars
- Fits 1.5", 1.75", 2" round bars
- Non-corrosive black powder coating
- hardware included
