XL-1240MF 12" Marine Subwoofer
IN STOCK NOW!
- New PBX dust cap
- New Polycarbonate Glass Fiber Basket
- Marine Grade 12" Subwoofer
- White powder coated aluminum grill included
- Injection Molded UV-Treated White Polypropylene Cone
- TPO Thermoplastic Polyurethane Surround
- 2.0" KSV Voice Coil Former
- 120 oz. Motor Structure
- Insulated Tinsel Leads
- Marine Grade Spider
- 250 Watts RMS/500 Watts Max
- Designed for FREE AIR applications and Sealed Enclosures
Home > Products > Marine audio >
XL-1240MF 12" Marine Subwoofer
Read more
XL-1240MF MARINE GRADE 12" SUBWOOFER
What better way to enjoy your day being out on the water in your boat is listening to your favorite music as well.
We have engineered the best musical reproduction solution with our XL Marine Grade woofers. They feature White UV inhibited Polycarbonate Glass Fiber Basket, White UV Inhibited Poly Woofer Cone, and Marine Grade Spider that delivers the best sonic bass reproduction on the water.
Sit back and relax knowing that you have put your music in the engineering hands of PowerBass.
Specifications
- Nominal Impedance: 4-ohm
- BL: 11.6
- Voice Coil Size: 2 in
- Material: Polypropylene
- Magnet Size: 140 oz
- Sensitivity (1W / 1M): 91 dB
- Motor Structure: 39 oz
- Cutout Diameter: 11 in
- Mounting Depth: 5.59 in
- Xmax: 9.5 mm
- Spl: 91 dB
- No: 0.32
- Qts: 0.71
- Qes: 0.75
- Qms: 4.5
- Mms: 117 g
- Cms: 160 uM/N
- Vas: 59 Ltr
- SD: 490.9 sqCM
- Fs: 35.0 Hz
- Test Impedance: 3.4 ohm
- VC Impedance: 4-ohms
- Size: 12"
- Sensitivity: 91 dB
- Frequency Response: 32 Hz - 500 Hz
- Voice Coil Size: 2"
- Power Handling (RMS/Peak): 250 / 500 watts
XL-1240MF 12" Marine Subwoofer
Other Views
Recommended Products
- New PBX logo dust cap
- 15" Dual 1-Ohm Subwoofer
- 1500 watt RMS/3000 Watts Max
- DDC Non-pressed Raw Pulp Cone
- High Roll Nitrile Butadine Rubber (NBR) Surrond
- 3.5” Vented HD BASV Voice Coil Former
- Perimeter Aero-Vent Voice Coil Cooling Vents
- Non Resonance DDC Coated Cast Aluminum Basket
- XTRA XTRA XTRA Large Triple Stacked Motor Structure
- Square Spring Loaded Nickel Plated Push Terminals
- Optimally Designed for Ported Enclosures
IN STOCK NOW!
- Extruded Aluminum Casing
- Built-in Rechargeable Li-ion Battery 1900mAH
- Micro USB 5V Charging
- Enhanced Ported Bass Response
- 3.5mm Aux input
- Single 10" 175 Watt RMS Amplified Downfiring Enclosure
- Computer Optimized 10" Thin Subwoofer Enclosure
- Custom Injected Molded Cone
- Large Roll Rubber Surround
- 2" Vented KSV Voice Coil Former
- Perimeter Aero Voice Coil Venting
- Poly-carbonate/Glass Fiber Composite Turbine Basket
- Chrome Push Terminals
- 2-Tone Vinyl/Carpet Finish
- 1-Channel 275 Watt High Efficiency Class A/B Design
- High Level (Speaker)/Low Level RCA input
- Soft Delay Turn On/Off Circuit
- Auto Turn-on (high level input only)
- Variable Low Pass Electronic Crossover 50Hz - 200Hz
- Variable 12db Bass Boost EQ @ 45Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
- Wired Remote Gain Control Included
- Down Firing Air Suspension Enclosure
- Heavy-Duty Reinforced Box Design
- Mounting Hardware Included
IN STOCK NOW!
- 12 Speaker 500 watt Amplified Bluetooth Powersports Soundbar
- 6 x 3.5" Square Poly Cone Woofers
- 2 x 3” Full Range Marine Grade Poly Cone Speakers
- 4 x 1” SD Mylar Tweeters
- Heavy Duty Extruded Aluminum Water Tight Housing
- LED back-lit Control Panel
- LED Visual Notifications
- Audible Power On/Off Notifications
- Built In DSP Processor w/Distortion Limiter
- Bluetooth and Wired Inputs
- 2 Volt Line Output
- Auto Turn On/Off Circuit
- Waterproof Wire Loom Connectors
- Universal L-Bracket Mounting System Included
- Universal Top or Bottom Mount Clamp Style Brackets (Sold Separately XL-SBCLAMP, XL-SBTCLAMP, XL-SBSCLAMP)
- Secondary Dash Mountable Controller Pad (Sold Separately XL-SBCON)
- CRS 4.0 Bluetooth Protocol
- >30' Bluetooth Range
- RCA Audio Output
- Power, Track Up/Down & Volume Up/Down
- USB 5V Charging Port
- 12V Remote Amplifier Turn On/Off Lead
- Detente buttons for easy use with gloves
- Water resistant cables and connectors
- Surface or Flush Mount
