XPRO-65CX Octagonal Mid Range Driver 4 ohm
- 6.5" Pro Audio Mid-range
- Octagonal easy stacking for more surface area
- Hybrid Carbon/DDC Stiff Paper Cone
- Pro Audio Double Roll Textile Surround
- Chrome Push Input Terminals
- 1.5" BASV Voice Coil
- 4-ohm Impedance
- 40 oz. Y-35 Grade Motor Structure
- Vented Pole Piece
- Grills Included
- Sold Individually
Home > Products > Component systems >
XPRO-65CX Octagonal Mid Range Driver 4 ohm
Read more
XPRO-65 6.5" PRO AUDIO OCTAGONAL MID-RANGE
PowerBass is proud to introduce the latest engineering marvel to Competitors and SPL Fanatics worldwide, the XPRO Competition SPL Mid-Range.
Engineering prowess is what put PowerBass on the map in the competition/SPL arena, the XPRO mid-range are no exception. We have integrated only the best parts available along with cutting edge Acoustic Engineering and mixed them with our Design Engineering team’s vast experience to come out with the loudest speakers available only for serious SPL Competitors.
Our SPL Mixology Department has put together a complete line of XPRO SPL products for not only the bass heads and loud mouths in our family, but the serious competitors that will not accept anything short of winning!
Specifications
- Nominal Impedance: 4-ohm
- BL:
- Material: Non woven wool paper
- Magnet Size: 40 oz.
- Sensitivity (1W / 1M): 93 dB
- Mounting Depth: 2.8 in
- Xmax:
- Spl:
- Qts:
- Qes:
- Qms:
- Mms:
- Cms:
- Vas:
- SD:
- Fs:
- Test Impedance:
- VC Impedance:
- Size: 6.5 in
- Sensitivity: 93 dB
- Frequency Response: 120 Hz - 10 kHz
- Voice Coil Size:
- Power Handling (RMS/Peak): 150 watts / 300 watts
Downloads
XPRO-65CX Octagonal Mid Range Driver 4 ohm
Recommended Products
IN STOCK NOW!
- Extruded Aluminum Casing
- Built-in Rechargeable Li-ion Battery 1900mAH
- Micro USB 5V Charging
- Enhanced Ported Bass Response
- 3.5mm Aux input
- Single 10" 175 Watt RMS Amplified Downfiring Enclosure
- Computer Optimized 10" Thin Subwoofer Enclosure
- Custom Injected Molded Cone
- Large Roll Rubber Surround
- 2" Vented KSV Voice Coil Former
- Perimeter Aero Voice Coil Venting
- Poly-carbonate/Glass Fiber Composite Turbine Basket
- Chrome Push Terminals
- 2-Tone Vinyl/Carpet Finish
- 1-Channel 275 Watt High Efficiency Class A/B Design
- High Level (Speaker)/Low Level RCA input
- Soft Delay Turn On/Off Circuit
- Auto Turn-on (high level input only)
- Variable Low Pass Electronic Crossover 50Hz - 200Hz
- Variable 12db Bass Boost EQ @ 45Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
- Wired Remote Gain Control Included
- Down Firing Air Suspension Enclosure
- Heavy-Duty Reinforced Box Design
- Mounting Hardware Included
- 4-Band Dual Zone Active Equalizer Bass, Mid-Bass, Mid, High
- 3 Zone Volume Control and Output
- Variable Master Volume Control
- Front Panel Selectable Inputs - Bluetooth, Aux, RCA
- Front Panel Tri Illumination Selector - Red, Blue, Green
- Front Panel Track Selector - Track Up / Down
- 6V RMS output
- Bi-Polar PWM Power Supply
- Frequency Response: 20Hz-40KHz
- Selectable 120/80Hz Subwoofer Crossover
- Conformal Coated PCB
IN STOCK NOW!
- 12 Speaker 500 watt Amplified Bluetooth Powersports Soundbar
- IPX6 Rated
- 6 x 3.5" Square Poly Cone Woofers
- 2 x 3” Full Range Marine Grade Poly Cone Speakers
- 4 x 1” SD Mylar Tweeters
- Heavy Duty Extruded Aluminum Water Tight Housing
- LED back-lit Control Panel
- LED Visual Notifications
- Audible Power On/Off Notifications
- Built In DSP Processor w/Distortion Limiter
- Bluetooth and Wired Inputs
- 2 Volt Line Output
- Auto Turn On/Off Circuit
- Waterproof Wire Loom Connectors
- Universal L-Bracket Mounting System Included
- Universal Top or Bottom Mount Clamp Style Brackets (Sold Separately XL-SBCLAMP, XL-SBTCLAMP, XL-SBSCLAMP)
- Secondary Dash Mountable Controller Pad (Sold Separately XL-SBCON)
- CRS 4.0 Bluetooth Protocol
- >30' Bluetooth Range
- RCA Audio Output
- Power, Track Up/Down & Volume Up/Down
- USB 5V Charging Port
- 12V Remote Amplifier Turn On/Off Lead
- Detente buttons for easy use with gloves
- Water resistant cables and connectors
- Surface or Flush Mount
- 800 Watt High Efficiency Class D Design
- 1-OHM Stable Mono Block Amplifier
- Ultra Low Current Draw
- Double Sided Copper Plated PCB
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- Variable Subsonic Filter
- High Current Voltage Ripple Rejection Circuitry
- Balanced RCA Inputs
- Auto Turn On/Off
- Remote Soft Delay Turn On/Off Circuit
- 40 Click Variable Low Pass Electronic Crossover
- 40 Click Variable Frequency/18dB Bass Boost EQ
- Variable Gain Control
- Wired Secondary Remote Gain Control Included
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Strapable Dual Amp Power Doubling Circuit (Amp-to-Amp Bridged at 2 ohm minimum)
