2XL-63C 6.5" System
- 6.5" 2-Way Component Speaker System
- Hybrid 4 Layer Paper/Wool Blend Woofer Cone
- Butyl Rubber Surround
- Bilit Aluminum CNC Cut Phase Plug
- 14 oz. Y-35 Woofer Magnet
- EFF Motor Structures (Efficient Flux Field)
- Rigid Tooled Basket with Stainless Steel Finish
- 1" Silk Dome Tweeter w/Neodymium Magnet
- Convertible Mount Tweeter for either Co-Axial or Standalone Tweeter Mount
- Computer Aided External 12dB 2-way Crossover Network
- 3-ohm System Impedance
Home > Products > Component systems >
2XL-63C 6.5" System
Read more
2XL-60C 2-WAY COMPONENT SYSTEM
Our 2XL component speakers have been redesigned to increase bass response while still producing the colorless imaging that the 2XL series is known for.
Featuring a 1” Emperors’ Silk Tweeter and a Non-Woven Paper/Wool cone, the 2XL components provide warm vocal tones and increased dynamic range. 2XL components also employ a 3-OHM voice coil to maximize your amplifiers power. We also give you the option of either mount the tweeter as a pole mount in the middle of the woofer or flush mount separately on your door or A-Pillar.
Take your listening to new limits with the new 2XL Components.
Specifications
- Nominal Impedance: 3-ohm
- Material: Non woven wool paper / silk dome tweeter
- Magnet Size: 14 oz
- Sensitivity (1W / 1M): 92 dB
- Mounting Depth: 2.48 in
- Size: 6.5 in
- Sensitivity: 92 dB
- Frequency Response: 59 Hz - 20 kHz
- Power Handling (RMS/Peak): 120 / 240 watts
Downloads
2XL-63C 6.5" System
Recommended Products
IN STOCK NOW!
- Extruded Aluminum Casing
- Built-in Rechargeable Li-ion Battery 1900mAH
- Micro USB 5V Charging
- Enhanced Ported Bass Response
- 3.5mm Aux input
- Single 10" 175 Watt RMS Amplified Downfiring Enclosure
- Computer Optimized 10" Thin Subwoofer Enclosure
- Custom Injected Molded Cone
- Large Roll Rubber Surround
- 2" Vented KSV Voice Coil Former
- Perimeter Aero Voice Coil Venting
- Poly-carbonate/Glass Fiber Composite Turbine Basket
- Chrome Push Terminals
- 2-Tone Vinyl/Carpet Finish
- 1-Channel 275 Watt High Efficiency Class A/B Design
- High Level (Speaker)/Low Level RCA input
- Soft Delay Turn On/Off Circuit
- Auto Turn-on (high level input only)
- Variable Low Pass Electronic Crossover 50Hz - 200Hz
- Variable 12db Bass Boost EQ @ 45Hz
- Variable Gain Control
- Protection Circuit: Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
- Wired Remote Gain Control Included
- Down Firing Air Suspension Enclosure
- Heavy-Duty Reinforced Box Design
- Mounting Hardware Included
- 4-Band Dual Zone Active Equalizer Bass, Mid-Bass, Mid, High
- 3 Zone Volume Control and Output
- Variable Master Volume Control
- Front Panel Selectable Inputs - Bluetooth, Aux, RCA
- Front Panel Tri Illumination Selector - Red, Blue, Green
- Front Panel Track Selector - Track Up / Down
- 6V RMS output
- Bi-Polar PWM Power Supply
- Frequency Response: 20Hz-40KHz
- Selectable 120/80Hz Subwoofer Crossover
- Conformal Coated PCB
IN STOCK NOW!
- 12 Speaker 500 watt Amplified Bluetooth Powersports Soundbar
- IPX6 Rated
- 6 x 3.5" Square Poly Cone Woofers
- 2 x 3” Full Range Marine Grade Poly Cone Speakers
- 4 x 1” SD Mylar Tweeters
- Heavy Duty Extruded Aluminum Water Tight Housing
- LED back-lit Control Panel
- LED Visual Notifications
- Audible Power On/Off Notifications
- Built In DSP Processor w/Distortion Limiter
- Bluetooth and Wired Inputs
- 2 Volt Line Output
- Auto Turn On/Off Circuit
- Waterproof Wire Loom Connectors
- Universal L-Bracket Mounting System Included
- Universal Top or Bottom Mount Clamp Style Brackets (Sold Separately XL-SBCLAMP, XL-SBTCLAMP, XL-SBSCLAMP)
- Secondary Dash Mountable Controller Pad (Sold Separately XL-SBCON)
- CRS 4.0 Bluetooth Protocol
- >30' Bluetooth Range
- RCA Audio Output
- Power, Track Up/Down & Volume Up/Down
- USB 5V Charging Port
- 12V Remote Amplifier Turn On/Off Lead
- Detente buttons for easy use with gloves
- Water resistant cables and connectors
- Surface or Flush Mount
- Soundbar / POD Square Clamps
- Perfect for Golf Cart Applications
- For use with the XL Soundbars, or XL POD models
- Fits 0.75", 1.0", 1.25" square bars
- Non-corrosive black powder coating
- hardware included
- Soundbar / POD Thin Mount Clamps
- Perfect for Under Roof Mount Applications
- For use with the XL Soundbars, or XL POD models
- Fits 1.5", 1.75", 2" round bars
- Non-corrosive black powder coating
- hardware included
- 800 Watt High Efficiency Class D Design
- 1-OHM Stable Mono Block Amplifier
- Ultra Low Current Draw
- Double Sided Copper Plated PCB
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- Variable Subsonic Filter
- High Current Voltage Ripple Rejection Circuitry
- Balanced RCA Inputs
- Auto Turn On/Off
- Remote Soft Delay Turn On/Off Circuit
- 40 Click Variable Low Pass Electronic Crossover
- 40 Click Variable Frequency/18dB Bass Boost EQ
- Variable Gain Control
- Wired Secondary Remote Gain Control Included
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Strapable Dual Amp Power Doubling Circuit (Amp-to-Amp Bridged at 2 ohm minimum)
