L-1004D 10" Subwoofer
- 10" Dual 4-Ohm Subwoofer
- 350 watt RMS/700 Watts Max
- Injection Molded PP Cone
- Large Roll NBR (Nitrile) Rubber Surround
- 2.0" Vented BKSV Voice Coil Former
- Perimeter Aero-Vent Voice Coil Cooling Vents
- Non Resonance DDC Coated Stamped Steel Basket
- Rubber Mounting Gasket/Trim Ring
- Chrome Push Terminals
- Optimally Designed for Both Small Sealed or Ported Enclosures
Home > Products >
L-1004D 10" Subwoofer
Read more
L-1004D 10" SUBWOOFER
Our new L Series Subwoofers have been engineered to deliver the earth-shaking bass but with a clean and smooth tone.
Each L model features a redesigned Injection Molded PP Cone. This cone combines deep bass and distortion free sound. Next we designed a single piece CNC machined back plate with extended pole piece to insure a strong symmetric gause (magnetic) field for increased operating efficiency. A sandblast finish was applied for good looks and durability.
To make the bass super tight, our engineers designed Large Roll NBR (Nitrile) Rubber surrounds which allows free movement of the cone for maximum SPL, a large motor structure for high power handling, 2.0” & 2.5" black Kapton voice coil former for optimum performance and cooling for maximum heat dissipation.
Specifications
- Fs: 33 Hz
- Cutout Diameter: 9 1/8 in (230.1mm)
- BL: 9.1
- Nominal Impedance: Dual 4-ohm
- Voice Coil Size: 2 in
- Material: Injection molded Polypropylene
- Sensitivity (1W / 1M): 91 dB
- Motor Structure: 164 oz
- Mounting Depth: 5.1 in
- Xmax: 11 mm
- Spl: 91 dB
- No: 0.24%
- Qts: 0.39
- Qes: 0.43
- Qms: 4.4
- Mms: 117.3 g
- Cms: 208.6 uM/N
- Vas: 32.3 Ltr
- SD: 330 sqCM
- Test Impedance: 1.6-ohms
- VC Impedance: 4-ohm + 4-ohm
- Size: 10 in
- Sensitivity: 91 dB
- Frequency Response: 33 Hz - 500 Hz
- Voice Coil Size: 2 in
- Power Handling (RMS/Peak): 350 / 700 watts
Downloads
L-1004D 10" Subwoofer
Other Views
Recommended Products
- Waterproof design IPX7
- Bluetooth 5.0 Chip provides 30Ft. of wireless range
- Dual 1500mAh Rechargeable Battery’s provide 10 hours of music playback
- TWS True Wireless Stereo
- SPLIT the BT-200 into 2 speakers for Modular Stereo Sound
- Dual Passive Radiators for enhanced Bass Response
- Rubber Bumper Cover for Rugged Protection.
- Dual USB-A to USB-C Charge Cable included
- Waterproof design IPX7
- Bluetooth 5.3 Chip provides 30Ft. of wireless range
- RGB Lighting with User Selectable Effects
- User Selectable Equalizer
- USB-A for use with Thumb Drive Music Storage
- USB-A for charging mobile devices
- Built in Microphone for handsfree calling
- 3600mAh Rechargeable Battery provides 7 hours of music playback
- TWS True Wireless Stereo – connect 2 BT-500 Tubes together for true wireless stereo sound
- Shoulder Strap for easy carry
- USB-C Charge Cable included
- 900 Watt High Efficiency Full-Range Class D Design
- Front Load Terminal Design
- 2-OHM Stable Six Channel Amplifier
- Ultra Low Current Draw
- Double Sided Copper Plated PCB
- PWM MOSFET Power Supply
- Digital Sound Optimization Circuitry
- High Damping Control Circuit
- Variable Subsonic Filter
- High Current Voltage Ripple Rejection Circuitry
- Balanced RCA Inputs
- Selectable Auto Turn On Circuit
- Remote Soft Delay Turn On/Off Circuit
- 40 Click Variable Detente High/Low Pass Electronic Crossover
- LPF / HPF / x10 BandPass Filter Selector Switch
- Variable Gain Control
- Calibrated Visual Clip Indicator
- Wired Secondary Remote Gain Control Included
- Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
- Digital Signal Processor for system integration.
- Wireless / APP Control compatible with PBX-DSP8.
- Auto Turn on with DC Offset
- High and Low level input
- Low Level user adjustable Outputs
- 8 Channels input / 8 channels output
- Amplifier remote turn on with user selectable delay
Processing Features:
- 32-Bit Digital Signal Processing
- 31 Band User Adjustable Equalization per channel
- User Adjustable Delay and Gain per channel
- User Adjustable Crossover Network with adjustable slopes 6 - 48db
- User Selectable Phase control per channel 0 / 180 degrees
- Adjustable input voltage per channel pairings 250mV - 9V
- 6.5" Pro Audio Compression Driver Co-Axial
- 1" Aluminum Compression Horn Tweeter
- Hybrid Carbon/DDC Treated Paper Cone
- Butyl Rubber Surround
- Compression Push Input Terminals
- 1.5" BASV Voice Coil
- 4-ohm Impedance
- 20oz. Y-35 Grade Motor Structure
- Vented Pole Piece
- Sold in Pairs
- Grill Included
- Marine Grade 8" 2-Way Pod Speakers
- Dual Thin Mount Hoop Rotatable Mounting Bracket
- RGB Illumination *Compatible with XL-RGB1
- Injection Molded UV-Treated Silver Polypropylene Cones
- Water Tight TPU Surround
- Grill Mounted 25mm SD Mylar Tweeter
- UV Inhibited Injection Molded Plastic Pod
- UV-treated Aluminum Mesh Grills
- Fits Bar Sizes 1.5", 1.875", & 2"
- 4-Ohm System Impedance
- Sold in Pairs w/Mounting Brackets and RGB Lighting
- Universal RGB Controller
- iOS and Android App Controlled
- IPX6 Rated
- Waterproof Sealed Design
- Infinite Color Choices
- 15 PreSet Effects
- Create your own Effects and Color Patterns
- Plug and Play with PowerBass XL RGB Speakers
